What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Coupler for Static Lines

rockitdoc

Well Known Member
Sponsor
I need to couple my static line from the ADAHRS in the left wing to the static line in the fuse. My ADAHRS is Dynon and their ADAHRS comes with T-fittings and pipe to pneumatic fittings, but no pneumatic to pneumatic. I guess I could just couple two pipe to pneumatic fittings together with a pipe thread coupler, but would prefer a more sanitary approach.
 
This part number from McMaster Carr will do it: 5779K14

There are numerous sources for these, but that’s a start.
 
On Second Thought...

Although those are the fittings I was looking for (thanks, as usual), maybe I should use a pipe coupler and two pipe to 1/4" pneumatics. That way, it can be disassembled if need be. Thoughts?
 
If the Steinair ones are like the older SafeAir ones, just press the line in, & to disconnect, just press the yellow ring in & the line slides out...
 
Back
Top