VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 08-27-2021, 03:32 PM
Bungalow Al's Avatar
Bungalow Al Bungalow Al is offline
 
Join Date: May 2016
Location: Western Maine Mountains
Posts: 19
Default Proud, and Recessed? Canopy Rails

Greetings all,

Currently working on my canopy rails, page 38-12. When I cleco the C-01409, C-01407, and C-01427 all together. The Left side has the C-01407 lower edge recessed below the C-01409. The Right side has the lower edge of the C-01407 sticking beyond the C-01409. See the photos. Both sides are cleco'd in the pre-punched holes on the C-01407. Haven't altered anything. Both C-01409s sit flat on the bench after fluting.

Any thoughts?

Thanks,
Attached Thumbnails
Click image for larger version

Name:	Right Rail Marked RZ.jpg
Views:	106
Size:	88.8 KB
ID:	15116  Click image for larger version

Name:	Left Rail Marked RZ.jpg
Views:	98
Size:	61.5 KB
ID:	15117  
__________________
Al "Bungalow" Brownlow
RV14 - N714AL Reserved
At the Hideout
"If we're not having fun, we're not doing it right"
Reply With Quote
  #2  
Old 08-30-2021, 01:10 PM
Mark Albery's Avatar
Mark Albery Mark Albery is offline
 
Join Date: Jul 2007
Location: Warwickshire UK
Posts: 715
Default

I had a similar issue and got the C-01409 part replaced by Van's.

It seems to have been a relatively common issue as others that I've spoken to had the same problem. It appears to be a manufacturing issue that the blank can move during the forming process and the bad ones aren't being picked up by QA.

Even my replacement wasn't perfect but close enough.

Send some photos to Van's and ask for a replacement.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:13 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.