What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Dynon HDX Auto-Trim Question...

Piper J3

Well Known Member
A friend has RV-12 with dual Dynon HDX and separate autopilot control panel. We are trying to determine if the auto-trim feature is enabled and to confirm if the AP is wired to control the trim. Looking at user and installation manuals hasn't "steered" us in the right direction yet. Any help appreciated. Thanks in advance....
 
The SkyView Autopilot module provides nice functionality, including pitch and roll trim servo switching and auto trim.

You will need to verify:
- You are using the Autopilot Module for trim servo switching. This is covered in the SkyView install manual. Simple to do, but someone may have gone old school and installed a now unnecessary trim relay deck or a product like Safety Trim.
- If the Autopilot Module is properly installed, you need to configure it for auto trim. This is also covered in the install manual along with setting up the trim widgets to so position on the SkyView EMS display.

Carl
 
Back
Top