VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-7/7A
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-11-2015, 05:42 PM
carrollcw's Avatar
carrollcw carrollcw is offline
 
Join Date: Jan 2012
Location: Friendswood, TX
Posts: 193
Default Full Stick Deflection in ROLL, feels like its fighting back!

I have heard this is normal for RV's but figured I'd ask anyway and see if there is a way to get rid of it. When I do a full deflection aileron roll, you can feel the ailerons shutter. Its hard to explain it. Not really a vibration, more of like the stick is bouncing in my hand.

I heard it is due to the leading edge on the up aileron being exposed to the air stream (its like a big block out there). Is this true? Anything that can be done? I'm thinking the only thing would be a total aileron redesign.
__________________
RV-7 Flying Since March 2015
N412HC
Titan IOX-370
SDS Tunable Injectors
EFII Dual Ignition and Fuel Injection
Garmin G3X Touch
Whirl Wind 200RV Prop
7XS0 Polly Ranch Airpark, Friendswood, TX
Reply With Quote
  #2  
Old 05-11-2015, 06:22 PM
Ironflight's Avatar
Ironflight Ironflight is offline
VAF Moderator / Line Boy
 
Join Date: Jan 2005
Location: Dayton, NV
Posts: 12,243
Default

Quote:
Originally Posted by carrollcw View Post
I have heard this is normal for RV's but figured I'd ask anyway and see if there is a way to get rid of it. When I do a full deflection aileron roll, you can feel the ailerons shutter. Its hard to explain it. Not really a vibration, more of like the stick is bouncing in my hand.

I heard it is due to the leading edge on the up aileron being exposed to the air stream (its like a big block out there). Is this true? Anything that can be done? I'm thinking the only thing would be a total aileron redesign.
Every RV I have ever rolled does that Clark - it is just letting you know that you are at the end of travel.....
__________________
Paul F. Dye
Editor at Large - KITPLANES Magazine
RV-8 - N188PD - "Valkyrie"
RV-6 (By Marriage) - N164MS - "Mikey"
RV-3B - N13PL - "Tsamsiyu"
A&P, EAA Tech Counselor/Flight Advisor
Dayton Valley Airpark (A34)
http://Ironflight.com
Reply With Quote
  #3  
Old 05-11-2015, 06:23 PM
g zero g zero is offline
 
Join Date: Jun 2007
Location: palm coast fl.
Posts: 945
Default Aileron stall

My 8 does it along with the 7 I've flown , I believe it's the ailerons "stalling " for a brief moment .
__________________
Rv8
N 666 TA
First Flight 2-3-2015 🚀
2017 donation paid
Reply With Quote
  #4  
Old 05-11-2015, 06:34 PM
Kyle Boatright Kyle Boatright is offline
 
Join Date: Aug 2005
Location: Atlanta, GA
Posts: 4,208
Default

Quote:
Originally Posted by g zero View Post
My 8 does it along with the 7 I've flown , I believe it's the ailerons "stalling " for a brief moment .
It is the downward pointing leading edge of the "up" aileron tripping the airflow and burbling. Van's tried VG's on that aileron leading edge years ago to see if they could solve the problem. They never published the results, so they must not have succeeded.
__________________
Kyle Boatright
Marietta, GA
2001 RV-6 N46KB
2019(?) RV-10
Reply With Quote
  #5  
Old 05-11-2015, 06:46 PM
Snowflake's Avatar
Snowflake Snowflake is offline
 
Join Date: Oct 2009
Location: Victoria, BC, Canada
Posts: 3,926
Default

Quote:
Originally Posted by carrollcw View Post
Anything that can be done?
I find that it happens more if my entry speed is higher. At a lower entry speed, I can do a full-deflection roll with no burbling.
__________________
Rob Prior
1996 RV-6 "Tweety" C-FRBP (formerly N196RV)
Reply With Quote
  #6  
Old 05-11-2015, 07:59 PM
chrispratt's Avatar
chrispratt chrispratt is offline
Super Moderator
 
Join Date: Oct 2005
Posts: 752
Default

My experience has been that the quicker the roll the more pronounced the snatch. As the others say, it's the norm for an RV. But it helps to know that going in. Try rolling more slowly and see if there's a difference.

Chris
__________________
Chris Pratt (2020 VAF DUES PAID)
RV-8 Flying, 850+hours
N898DK
Lycoming O-360-A1A, Hartzell CS
52F (Northwest Regional, Aero Valley, Whatever, TX)
Reply With Quote
  #7  
Old 05-13-2015, 07:22 PM
carrollcw's Avatar
carrollcw carrollcw is offline
 
Join Date: Jan 2012
Location: Friendswood, TX
Posts: 193
Default

Thanks everyone for the feedback. Although not a big deal, it would be nice to have ailerons without all that drag during full deflection maneuvers!
__________________
RV-7 Flying Since March 2015
N412HC
Titan IOX-370
SDS Tunable Injectors
EFII Dual Ignition and Fuel Injection
Garmin G3X Touch
Whirl Wind 200RV Prop
7XS0 Polly Ranch Airpark, Friendswood, TX
Reply With Quote
  #8  
Old 05-13-2015, 07:50 PM
scsmith scsmith is offline
 
Join Date: Jan 2008
Location: Ashland, OR
Posts: 2,561
Default Frise Ailerons

Previous posts are correct that it is caused by flow separation from the nose of the up-aileron projecting down into the airstream, and it has a rather sharp nose radius on that side so the flow separates.

You should be thankful and grateful though - This style of aileron, called a Frise aileron, provides very light stick forces because of the flow around the nose providing an aerodynamic counterbalance.

Changing to a center-hinged aileron would eliminate this buffet at large deflection, but instead, you would have heavier aileron forces all the time. There are other somewhat successful types of aerodynamic counterbalance with curtain seals and blunt trailing edges, but none provide the delightfully light stick forces we all appreciate on the RV's.

If you reduce the aileron deflection just a bit, the buffet will go away, and you will see about the same roll rate - just don't push the stick all the way to the stop, try 3/4 deflection or so.
__________________
Steve Smith
Aeronautical Engineer
RV-8 N825RV
IO-360 A1A
WW 200RV
"The Magic Carpet"
Hobbs 625
LS6-15/18W sailplane SOLD
bought my old LS6-A back!!
VAF donation Jan 2020
Reply With Quote
  #9  
Old 05-14-2015, 02:25 AM
F1Boss's Avatar
F1Boss F1Boss is offline
 
Join Date: Aug 2006
Location: Taylor Texas
Posts: 811
Default Easy fix

The Sport wing version of the F1 uses the same aileron shape, and has a similar problem. One ambitious builder decided to fix this problem by curving the bottom of the ribs and skin fwd of the spar - in the same manner as was done on the Bearcat. I'll have to check if this project ever got into the air, but I do recall the builder said the change was easy to incorporate. I think he raised the counterweight tube 3/8"? It could have been 1/4" - it wasn't much. The aileron had a better looking airfoil when finished.

If you are interested in this change,let me know and I'll see if I can find the pictures of the finished product.

The Evo uses center higed ailerons, and these have camber on the bottom. At low speeds, these do have a bit more resistance, but they don't load up nearly as much as the std RV aileron does at higher speeds. Of course, the 'feel' is very different, so a comparison is difficult.

Carry on!
Mark
Reply With Quote
  #10  
Old 05-23-2015, 05:07 PM
R. Daniels's Avatar
R. Daniels R. Daniels is offline
 
Join Date: Apr 2013
Location: Redding, Ca.
Posts: 274
Default

They all do that. It's not a problem.
__________________
RV-8, flying since 2000, 1,020 hours TT
Have completed;
1 RV-8 My personal toy, IO-360, C/S, Tip tanks
3 RV-7A's
1 RV-4
1 Glastar
1 Velocity XL
1 Glastar under construction
1 RV-8 under construction
1967 Camaro RS undergoing frame off restomod
Pre-purchase inspections are my specialty
I cover everything west of the continental divide by RV-8
EAA Tech. Counseler. Chapter 157
Dues paid 2014-2015
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:02 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.