VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 05-11-2015, 09:26 AM
borvaprops borvaprops is offline
 
Join Date: May 2015
Location: wilmington
Posts: 1
Default component overhaul

Hello everyone Im not sure if this is the best section to post this. Im looking for a good small shop recomendation to get acessories overhauld on different lycoming engines mostly io360 and io540.
Magnetos, fuel injectors, fuel pumps, fuel servo, carburetors.

regards,
Reply With Quote
  #2  
Old 05-11-2015, 09:51 AM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,420
Default Welcome to VAF!

Gabriel, welcome aboard the good ship VAF
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #3  
Old 05-11-2015, 09:54 AM
Don at Airflow Don at Airflow is offline
 
Join Date: Jun 2006
Posts: 316
Default Fuel injection overhauls

We are an FAA Repair Station that overhauls Bendix / Precision fuel injection systems and components. We also overhaul Lear/Romec fuel pumps.

As well as our own design experimental fuel injection systems we also overhaul Bendix fuel injection systems for experimental aircraft installations.

If you need additional information or pricing give me a call at 864-576-4512.

Don.
Reply With Quote
  #4  
Old 05-11-2015, 02:03 PM
Raymo's Avatar
Raymo Raymo is offline
 
Join Date: Nov 2014
Location: Richmond Hill, GA (KLHW)
Posts: 2,189
Default

I used Maxwell Magneto in Florida. Recommended by a friend and long time builder/RV-8 owner. Happy with the service and pricing. About 1 week turn-around, if I recall.

201 Airport Rd
Bunnell, FL 32110
386-437-9700
__________________
Ray
RV-7A - Slider - N495KL - First flt 27 Jan 17
O-360-A4M w/ AFP FM-150 FI, Dual PMags, Vetterman Trombone Exh, SkyTech starter, BandC Alt (PP failed after 226 hrs)
Catto 3 blade NLE, FlightLines Interior, James cowl, plenum & intake, Anti-Splat -14 seat mod and nose gear support
All lines by TSFlightLines (aka Hoser)
Reply With Quote
  #5  
Old 05-11-2015, 02:26 PM
az_gila's Avatar
az_gila az_gila is offline
 
Join Date: Jan 2005
Location: 57AZ - NW Tucson area
Posts: 10,011
Default

I've used Arizona Aircraftsman in Prescott AZ.

They take care of the well used Embry-Riddle planes and do the accessory overhaul in their own shop. Worth a call to check -

http://www.air-craftsman.com/

There may be a similar outfit near the main Embry-Riddle school in Florida.
__________________
Gil Alexander
EAA Technical Counselor, Airframe Mechanic
Half completed RV-10 QB purchased
RV-6A N61GX - finally flying
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ
Reply With Quote
  #6  
Old 05-11-2015, 02:29 PM
g zero g zero is offline
 
Join Date: Jun 2007
Location: palm coast fl.
Posts: 945
Default Overhaul

I also recommend Maxwell Magneto . They are located at my home airport
KFIN
__________________
Rv8
N 666 TA
First Flight 2-3-2015 🚀
2017 donation paid
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:15 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.