|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

05-08-2015, 04:39 AM
|
|
|
|
Join Date: Aug 2012
Location: Albany Western Australia
Posts: 54
|
|
Looking for seat rail mod
As well as trimming the front of the nylon seat runners about 3/8 inch to allow the seat to be removed rearward, you might also consider fitting nut plates under the seat stops, you need to replace the existing Bots with longer ones but the seat removal then only requires removing two bolts that hold the stops and the seats slide right off, no need to remove the T Handle bracket. Not my idea but works like a dream. Cheers from Western Australia
|

05-10-2015, 04:05 PM
|
|
|
|
Join Date: Feb 2007
Location: Mpumalanga, South Africa
Posts: 1,065
|
|
I fitted the seats today.
I put the chamfer on the front of the plastic and cut the rear of the rails. After scratching my head a bit and finally working it out, I didn't see the point of nutplates on the T-handle. You can't get a socket on the outside and if you lift the seat cushion, access to the nuts is easy.
First seat took me 2 hours. Second one, 20 minutes. Thinks - if it seems THAT hard, you are probably doing something wrong  We live and learn.....
__________________
Paul
Mercy Air, White River FAWV
RV-10 ZU-IIZ - "Zeus"
Building Bearhawk Bravo - RV-18 not available
2019 Donation Made
|

05-10-2015, 04:27 PM
|
 |
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,420
|
|
Quote:
Originally Posted by paul330
I After scratching my head a bit and finally working it out, I didn't see the point of nutplates on the T-handle. You can't get a socket on the outside and if you lift the seat cushion, access to the nuts is easy.
|
Nut plates go on the T handle body, bolts go in from the inside------just lift the seat cushion and remove the bolts.

__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010
Phase 1 done, 2/4/2011 
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|

05-10-2015, 04:50 PM
|
|
|
|
Join Date: Dec 2011
Location: Livermore, CA
Posts: 6,797
|
|
Quote:
Originally Posted by paul330
I fitted the seats today.
After scratching my head a bit and finally working it out, I didn't see the point of nutplates on the T-handle. ....
|
It all depends on how much, if any, interior you install between the T handle and the outside cabin wall. I have none, access is easy. Others have put side panels in there and now find it hard to get at the outboard side of the T handle.
|

05-11-2015, 01:32 AM
|
|
|
|
Join Date: Feb 2007
Location: Mpumalanga, South Africa
Posts: 1,065
|
|
I have the Flightline interior and it was no problem inserting the bolts from the outside and getting a spanner on them.
__________________
Paul
Mercy Air, White River FAWV
RV-10 ZU-IIZ - "Zeus"
Building Bearhawk Bravo - RV-18 not available
2019 Donation Made
|

05-11-2015, 05:33 AM
|
|
|
|
Join Date: Aug 2012
Location: Albany Western Australia
Posts: 54
|
|
Looking for seat rail mod
Now that we've got trimming the front of the nylon runners as an easier option than chopping off the rear of the seat rails past the brains trust, its a pretty easy step to see that by putting two nut plates per seat under the Seat Floors F1067A to secure the seat rail stops means that now only two (longer) easily accessed bolts need to be removed so the seat rail stops can be removed and then the seat just slides off rearward. So........no need to fit four nut plates per seat to the T handle assembly, no need to remove the T handle assembly for seat removal, no need to lift the cushions to access bolts or nuts etc, just a real good idea, wasn't mine but it was on Matronics or VAF some time ago. Cheers from Western Australia
|

05-11-2015, 01:54 PM
|
|
|
|
Join Date: Sep 2007
Location: Mesa Arizona
Posts: 608
|
|
>>its a pretty easy step to see that by putting two nut plates per seat under the Seat Floors F1067A to secure the seat rail stops means that now only two (longer) easily accessed bolts need to be removed so the seat rail stops can be removed and then the seat just slides off rearward. So........no need to fit four nut plates per seat to the T handle assembly, no need to remove the T handle assembly for seat removal, no need to lift the cushions to access bolts or nuts etc, just a real good idea,<<
Exactly. That's what I did and it works great. Easier to mod and more user friendly to access than the T handle IMO.
__________________
Myron Nelson
Mesa, AZ
RV-10 N24EV
KITPLANES Contributing Editor
Last edited by woxofswa : 05-11-2015 at 01:57 PM.
|

06-08-2015, 05:19 PM
|
 |
|
|
Join Date: Jan 2005
Location: Tampa, FL
Posts: 2,861
|
|
Data point
Ok so I had my unmodified front seats out working on my interior and on a whim decided to try and reinstall them without removing the carpet or more importantly the flap torque tube covers . And....the seats went on just fine. I could see that had the carpet not been on the covers that they most likely would have been scratched, but a piece of tape strategically placed on the covers would have prevented that.
__________________
Todd "I drink and know things" Stovall
PP ASEL-IA
RV-10 N728TT - Flying!
WAR EAGLE!
|

06-08-2015, 06:24 PM
|
|
|
|
Join Date: Dec 2011
Location: Livermore, CA
Posts: 6,797
|
|
What is your builder number? Is it possible Vans has made a small mod (and not advertised it)? Be interesting to compare your seats, rails, torque tube cover to an older plane.
|

06-08-2015, 06:29 PM
|
 |
|
|
Join Date: Jan 2005
Location: Tampa, FL
Posts: 2,861
|
|
40631 and I got my fuse kit at the end of 2010 so I doubt it.
__________________
Todd "I drink and know things" Stovall
PP ASEL-IA
RV-10 N728TT - Flying!
WAR EAGLE!
Last edited by Auburntsts : 06-08-2015 at 06:40 PM.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 09:03 AM.
|