|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

07-18-2013, 09:12 PM
|
|
|
|
Join Date: Sep 2012
Location: GA
Posts: 50
|
|
TOGA for flight director
Anybody figured out if the flight director on the Garmin G3X with GMC305 controller has a Take Off Go Around Function? I must have missed that day in school  !
Phil
|

07-19-2013, 05:08 AM
|
 |
|
|
Join Date: Sep 2010
Location: Olathe, KS
Posts: 2,885
|
|
G3X TO/GA Button
Quote:
Originally Posted by Acrophil
Anybody figured out if the flight director on the Garmin G3X with GMC305 controller has a Take Off Go Around Function? I must have missed that day in school  !
Phil
|
Hello Phil,
You bet it does. Page C-4 in the Rev. J G3X Installation manual explains how to wire a TO/GA button on your panel (generally near the throttle) to use this feature.
If you have a GTN 6XX/7XX, it gets even better because pushing the TO/GA button on an approach also activates the missed approach on the GTN at the same time that the G3X autopilot is transitioned.
Pushing the TO/GA button on the ground before you takeoff setups up the TO climb attitude on the flight director. Once you are airborne, just push the AP engage and you are all set.
If you get a chance to visit the experimental aviation tent at Oshkosh next week, we can demonstrate this with one of our G3X benches which has a GTN 750 and a TO/GA button.
Thanks,
Steve
__________________
Garmin G3X Support
g3xpert@garmin.com
1-866-854-8433 - 7 to 7 Central Time M to F
Please email us for support instead of using Private Messaging due to the limitations of the latter.
Last edited by g3xpert : 07-19-2013 at 05:11 AM.
Reason: Added invite.
|

07-19-2013, 07:27 AM
|
|
|
|
Join Date: Sep 2012
Location: GA
Posts: 50
|
|
TOGA
Steve
Thanks. That was exactly what I was looking for. I do have a GTN650 and the combined capability of this equipment rivals the G1000 in the King Air 300 that I fly. Good stuff.
Phil
|

07-19-2013, 10:43 AM
|
 |
|
|
Join Date: Oct 2011
Location: Atlanta
Posts: 878
|
|
Don't tell me you finally got the airplane back?
__________________
RV-8 IO-360 (Bought)
RV-6 O-360 C/S (Sold)
Walkman aka Flame Out
|

07-19-2013, 01:28 PM
|
|
|
|
Join Date: Sep 2012
Location: GA
Posts: 50
|
|
Flying it!
Yep. Cool stuff. Come check it out.
Phil
|

04-01-2015, 07:13 PM
|
|
|
|
Join Date: Feb 2011
Location: USA
Posts: 3,179
|
|
TO/GA require engine monitor module GEA24
Having blindly headed down the path, the following may be helpful to others.
While the TO/GA (take off / go around) feature is handy when flying an autopilot coupled approach with the G3X, it has an unconventional pre-requisite.
The feature is only available if you also install the GEA24 engine monitor module.
G3Xperts may have additional information to help clarify the capability.
|

04-01-2015, 08:04 PM
|
 |
|
|
Join Date: Aug 2005
Location: Dallas/Ft Worth, TX
Posts: 5,687
|
|
Quote:
Originally Posted by humptybump
Having blindly headed down the path, the following may be helpful to others.
While the TO/GA (take off / go around) feature is handy when flying an autopilot coupled approach with the G3X, it has an unconventional pre-requisite.
The feature is only available if you also install the GEA24 engine monitor module.
G3Xperts may have additional information to help clarify the capability.
|
Count me in on this wish list item, I use an EI engine monitor and have no plans on switching to the GEA24, sure wish they would give us non GEA24 users this feature.
__________________
Walt Aronow, DFW, TX (52F)
EXP Aircraft Services LLC
Specializing in RV Condition Inspections, Maintenance, Avionics Upgrades
Dynamic Prop Balancing, Pitot-Static Altmeter/Transponder Certification
FAA Certified Repair Station, AP/IA/FCC GROL, EAA Technical Counselor
Authorized Garmin G3X Dealer/Installer
RV7A built 2004, 1700+ hrs, New Titan IO-370, Bendix Mags
Website: ExpAircraft.com, Email: walt@expaircraft.com, Cell: 972-746-5154
|

04-02-2015, 04:59 AM
|
|
|
|
Join Date: Sep 2006
Location: Locust Grove, GA
Posts: 97
|
|
Quote:
Originally Posted by humptybump
The feature is only available if you also install the GEA24 engine monitor module.
|
So, early G3X adopters with GSU73 are left out on this one?
__________________
Aaron Sims
RV-10 (2015 Bronze Lindy)
RV-6A (sold)
Home Field: Mallards Landing (GA04)
Locust Grove, GA
|

04-02-2015, 05:09 AM
|
 |
|
|
Join Date: Sep 2010
Location: Olathe, KS
Posts: 2,885
|
|
Quote:
Originally Posted by GTWreck
So, early G3X adopters with GSU73 are left out on this one?
|
Hello Aaron,
Not to worry, both the GEA 24 engine/airframe interface unit and the GSU 73 integrated sensor unit have the same support for discrete inputs. For more information, please see pages 29-141 through 29-142 of the current G3X installation manual.
- Matt
__________________
Garmin G3X Support
g3xpert@garmin.com
1-866-854-8433 - 7 to 7 Central Time M to F
Please email us for support instead of using Private Messaging due to the limitations of the latter.
|

04-02-2015, 06:11 AM
|
|
|
|
Join Date: Feb 2011
Location: USA
Posts: 3,179
|
|
Thanks Matt,
I should have noted my comment is for those with the current G3X package.
When the basic bundle kit ADAHRS was changed from the GSU73 to the GSU25 we lost the discrete inputs. Those inputs are now a separate box.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:31 AM.
|