Quote:
Originally Posted by DennisRhodes
How does that wire in ? Has some pretty small looking wires on it. The wiring diagram did not open up on the B&C site.
|
Dennis, this module will protect an externally regulated alternator. It is connected to the field wire between the circuit breaker and regulator. When it senses high voltage it shorts the field circuit to ground which pops the breaker taking the alternator off line. This happens in milliseconds.
There is a way to use the module with an internally regulated alternator but it requires additional components. Details are in Bob Nuckoll's book,
The AeroElectric Connection.