VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-8/8A
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-06-2015, 12:27 PM
cb02740 cb02740 is offline
 
Join Date: Dec 2010
Location: Germany, Bavaria
Posts: 5
Default Turtle Deck

Hi together,

Today I prepared everything for riveting the rear upper skin on my -8.
I found that the control cables for the rudder rubbing on the lower longeron at the rear section of the fuselage. I've checked the manual but found nothing .

Is it okay to install a simple edge guard on the longeron? Iam looking for a simple solution.

Second question. Is there a proposed rivet sequence? I would start with all bulkheads an go then to the longerons.

Thanks to all
Reply With Quote
  #2  
Old 01-06-2015, 01:54 PM
Airzen Airzen is offline
 
Join Date: Apr 2011
Location: Kirkland, WA
Posts: 167
Default Here you go..

Had the same problem. Here is how I solved it: http://www.vansairforce.com/communit...ad.php?t=93298
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:46 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.