That's It
You're correct. I looked back over my builder's log and I can clearly see in the photos where the "canoe" is still upside down and the rivets between the 770 and longeron are installed, with clecos further aft holding the 773 skin to the longeron.
You just have to pay attention to the proper call-outs for either the slider or the tip-up, as they're very different in the front area. We marked the holes directly on the skin that didn't get riveted with a big fat Sharpie "X".
__________________
David Welsh
Beaumont, TX
RV-7 N413WD
|