I finally finished the installation of the Baja light fixture. Initially I installed two MR-16 LED lights but on Geoff's recommendation I took them out and installed the Baja instead. Here is a link to their web site
http://www.bajadesigns.com/ProductDe...mNumber=490003
The lighting I had before this installation was a single Duckworks HID LE light near the LH wing tip plus a MR-16 light in each wing tip one of which was a HID. This setup seemed marginal to me, with the addition of of the Aerosport cowl light fixture with two LED lights the center line lighting was vastly improved.
I have yet to test this new Baja Squadron Pro light with 4 LED lights in it but judging by how bright it is during daylight hours and reports I have heard it will bring night back to day.... I will report back here as soon as I have had a chance to test it during night landings
Here I am getting a helping hand from the master himself Mr. Geoff Combs.
The fixture with two MR-16 LED lights
The Squadron Pro light installed.

The finished product! The most difficult part of the job was the prepping and painting, especially with two colours.
These are pictures of the box the light came in to give you an idea of what to order.

__________________
Ivan Kristensen
Guelph, ON. Canada
RV-10 (C-GMDV) 1355hrs.
Dual GRT 8.4" HXr EFIS, VP-200, TT A/P, Avidyne IFD440, uAvionixX ADS-B out, Sky Radar WX and Traffic, Dual EI's (one Lightspeed & one SDS CPI)
RV-14A under construction.
Link to my build site:
https://ivankristensen.smugmug.com/B...ENTAL-aircraft