Some fellow hanger buddies and I are building our own tail-jack. The one we had at the airport left for another home. We took measurements and pics before it left. I have drafted up plans for a modified tail-jack (a bit taller to get level for RV-8's). I can send a *.PDF file to those interested in welding up their own. You figure the parts list and the rest. I don't do PM. Send me an email to "rv18r (at) Comcast.net" if interested and I will send. Figure it is OK to copy the product since it is no longer made.
__________________ Bruce W
RV-7 QB
(500+ hours)
Elk Grove, CA
__________________
RV7A Flying since 2015
O-360-A1F6 (parallel valve) 180HP
Dual P-mags
Precision F.I. with AP purge valve
Vinyl Wrapped Exterior
Grand Rapids EFIS
Located in western Canada
I have revised the plans I prepared for the tail jack based on cutting out the pieces and figuring necessary angles. I have send the revised PDF file of the plans to builders that sent a request by email (I think). Let me know if I missed anyone.
Bruce W.
rv18r (at) Comcast.net
__________________ Bruce W
RV-7 QB
(500+ hours)
Elk Grove, CA
Linear Mode
