|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

08-06-2014, 07:46 PM
|
|
|
|
Join Date: Jan 2014
Location: Conroe, Texas
Posts: 32
|
|
Seat Belts
Stupid question - but is there any specific reason everyone seems to go with the Crowe belts other than the fact that they look good? I started installing the crotch strap kit and remembered seeing someones build log that mentioned a modification to the anchor point due to a thicker attach plate on the Crowe belt. I'm thinking it might be best to purchase my belts now to confirm that they'll fit before proceeding.
|

08-06-2014, 07:55 PM
|
|
|
|
Join Date: Dec 2011
Location: Meridian ID, Aspen CO, Okemos MI
Posts: 2,645
|
|
They are a better price than some of the others - but still a well known name. I have the seatbelts from Vans and would probably use them, but they are not the color I want now. I will probably get the Crow harness 5 point system. Not sure about the cam or standard lock.
__________________
rockwoodrv9a
Williamston MI
O-320 D2A
Awaiting DAR Inspection
|

08-06-2014, 09:47 PM
|
|
|
|
Join Date: Jan 2014
Location: Conroe, Texas
Posts: 32
|
|
Thanks Rockwood.... makes sense now.
|

08-06-2014, 09:48 PM
|
 |
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,420
|
|
Welcome to VAF!
Bryan, welcome to VAF 
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010
Phase 1 done, 2/4/2011 
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|

08-06-2014, 09:51 PM
|
|
|
|
Join Date: Jan 2014
Location: Conroe, Texas
Posts: 32
|
|
Thanks Mike...... glad to finally be part of VAF. Certainly nice to have this resource for us 1st timers.
|

08-07-2014, 10:39 AM
|
 |
|
|
Join Date: Nov 2010
Location: Okanagan Valley BC, Canada
Posts: 483
|
|
On the -8 all of the attach points had plenty of flex in them to accommodate the Crow belts. Only mod was to bush the holes in the belt shackle with some 6mm washers. The ones I found were an exact fit...
Perhaps a -7 builder will comment on the flexibility of the -7 attach points or need to shim them..
__________________
Ron Townson
Okanagan Valley BC, Canada
RV-8 Completed Dec 2013
Membership renewed Sept 8, 2019
|

08-07-2014, 01:02 PM
|
 |
|
|
Join Date: Jan 2007
Location: Mount Vernon, IN
Posts: 1,270
|
|
Just before the Oshkosh show, we began carrying Raptor safety belts and harnesses. For comparison, they are similar to Crow or other well known belts and are made in the USA.
They are 2" width, 5 point harnesses, are available in all of the usual colors, come complete with the fittings that you'll need, and pads, all for one very competitive, all-inclusive price. We also offer thinner, yet still plenty beefy, mounting hardware for easier installation into typical RV attach points.
Latch and link belts are $200 and camlock belts are $300.
Since we just returned from the Oshkosh show, we don't have them up on our website yet. I'll pester Blake to get that done tonight, so check our store tomorrow if interested. Thanks.
__________________
Vince Frazier
www.f1aircraft.com
F1 Rocket and F4 Raider components
1-888-F1AIRCRAFT (1-888-312-4727)
www.flyboyaccessories.com
RV and Rocket Accessories, Tailwheels, Tools, & More
1-888-8FLYBOY (1-888-835-9269)
F4 Raider - under construction
F1-H Rocket "Crazy Horse" - sold
RV-4 "Chief Pontiac" - sold in 1994, purchased in 2018
Last edited by vfrazier : 08-07-2014 at 01:04 PM.
|

08-07-2014, 01:15 PM
|
|
|
|
Join Date: Mar 2009
Location: Grand Rapids, MI
Posts: 1,004
|
|
I went with Hooker belts for no other reason than they matched the color of my Classic Aero leather seats perfactly. In retrospect, I really like them and they are very comfortable with the pads.

__________________
Paul K
West Michigan
Unfortunately in science, what you believe is irrelevant.
2020 donation made, exempt but worth every dime!
|

08-07-2014, 06:41 PM
|
|
|
|
Join Date: Jan 2014
Location: Conroe, Texas
Posts: 32
|
|
Vince, I'll go check them out on the site. I want to purchase a Rocket Link anyway.
Paul, thanks for the comments. By the way, I can see why you went with the Hooker belts. Your bird looks amazing with those. I can only hope mine ends up looking somewhat respectable as well.
|

08-07-2014, 10:11 PM
|
 |
|
|
Join Date: Jan 2007
Location: Mount Vernon, IN
Posts: 1,270
|
|
Blake is working on getting the info onto the store tonight. It will be a bit bare until he is able to take some better photos and get them posted. In the meantime, here is a quick photo of a couple of the belts that we had at the Oshkosh booth.
They are a bit wrinkled because I just pulled them out of a box. Also, there is no mounting hardware installed, but the hardware types are in the center of the photo. Pads are available if desired. Different configurations are available. Pull up or pull down to tighten is your choice. All for the same price. No up charges to get what you want.
We are taking orders, so let us know what you need. You can contact me at vincefrazier@gmail.com or call me at 812-464-1839 for more info.
Once the web info is complete, I'll post an update to this thread.
__________________
Vince Frazier
www.f1aircraft.com
F1 Rocket and F4 Raider components
1-888-F1AIRCRAFT (1-888-312-4727)
www.flyboyaccessories.com
RV and Rocket Accessories, Tailwheels, Tools, & More
1-888-8FLYBOY (1-888-835-9269)
F4 Raider - under construction
F1-H Rocket "Crazy Horse" - sold
RV-4 "Chief Pontiac" - sold in 1994, purchased in 2018
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:39 AM.
|