Quote:
Originally Posted by rotorbailey
I want to connect an IR camera to my G3X system. I searched the Install Guide for "video" and the word does not appear.
The marketing page says that it accepts composite video through a BNC connector. Can anyone point me to more detailed information:
- What are the supported input and displayed resolutions?
- With a single 10" GDU, it will always act as PFD and I presume the video is only viewable on half of the screen or as an inset?
|
Hello,
The composite video input on the BNC connector should work with just about any PAL/NTSC camera (such as the Garmin VIRB). This video input is standard on every 10.6" GDU 460/465 and 7" GDU 450/455 touch screen display.
You are correct that the video image on a PFD may be viewed in both an inset window on the full width PFD and in a split screen window on the PFD. Just touching the video inset window splits the PFD and brings up the larger video window. On an MFD, the video image may be viewed in a full width window.
The image from the camera may be viewed at its native resolution, scaled to window width, scaled to window heighth, or stretched in both width and heighth to fit the entire window.
Let us know if you have additional questions.
Thanks,
Steve