Bob,
I rip the top off the box and shake it all over.
This stuff is cheap. 89 cents.
Might look like dough boy when done.

Then rup it into the cracks and screw heads.
After all the excess is wiped up I use the air hose and hit all screw
Heads and then the rivet lines.
Do not use solvent. It will flash the shine if you know what I mean.
Hope it helps.
Now go flying and worry about the shine in a few days.
Boomer
__________________
Bruce (BOOMER) Pauley
Kathy (KAT) Pauley
RV 7A--"MISS MARIE"--- N177WD (SOLD FLYING)72742
VAF #582-----------------EAA LIFETIME MEMBER
EX -KC-135A -------------BOOM OPERATOR #3633
VAN'S FLIGHT------------#6930
See you in OSHKOSH
http://www.mykitlog.com/users/index....ley&project=84
=VAF= 2006-2020 DUES PAID