I mounted my SD 8 control items on a scrap piece of alum, and then used nutplates and screws to mount the plate to the sub panel. The crowbar is just glued onto the plate with a dab of Shoe goo.
As to the E buss stuff, sorry no help there.
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010
Phase 1 done, 2/4/2011 
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|