VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > The Never Ending Debate Section > Tools
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #2  
Old 11-12-2006, 10:29 PM
Paul Eastham's Avatar
Paul Eastham Paul Eastham is offline
 
Join Date: Oct 2005
Posts: 506
Default

I've heard of them, but haven't seen firsthand. Deburring both sides of a hole in one pass has potential speed advantages during the entire kit, but would be even more helpful late in construction when you often cannot reach both sides of a hole with a conventional debur tool.
__________________
Paul Eastham - Mountain View CA
RV-9A standard build, flying! ~300 hrs
EAA Chapter 338 San Jose
Reply With Quote
  #3  
Old 11-12-2006, 10:45 PM
fehdxl fehdxl is offline
 
Join Date: Mar 2005
Location: Bellevue, NE
Posts: 686
Default

Mark,
I haven't used an ezburr, but I have used a Cogsdill Buraway (http://www.cogsdill.com/deburring.html) and it works great! A real time saver for sure.

See this thread for more info.
http://www.vansairforce.com/communit...read.php?t=993

-Jim
40603
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:01 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.