(g) Fuel tank selector valves must--
(1) Require a separate and distinct action to place the selector in the "OFF" position; and
(2) Have the tank selector positions located in such a manner that it is impossible for the selector to pass through the "OFF" position when changing from one tank to another
__________________
Tim Emig
RV7
As I hurdled through space, one thought kept crossing my mind - every part of this rocket was supplied by the lowest bidder.
~ John Glenn
(g) Fuel tank selector valves must--
(1) Require a separate and distinct action to place the selector in the "OFF" position; and
(2) Have the tank selector positions located in such a manner that it is impossible for the selector to pass through the "OFF" position when changing from one tank to another
I don't believe this applies to E-AB aircraft. Thus, the builder can do about anything they want. Including installing a valve meant for a high wing plane, as described in the post regarding the RV-10.
__________________
Bill R.
RV-9 (Yes, it's a dragon tail)
O-360 w/ dual P-mags
Build the plane you want, not the plane others want you to build!
SC86 - Easley, SC www.repucci.com/bill/baf.html
Far 23.995
Linear Mode
