Nose gear adjust - 6a

[Valentine]

22 to25 lbs but measure where, how?

[painless]

I use a fish scale, hooked onto a piece of music wire (could even be a piece of coat hanger) that is looped under the axle bolt head before the nut is tightened down. Pull on it perpendicular to the nose wheel.

[pierre smith]

I used a 3/8" drive socket on a 6' extension and stuck it through the wheelpant, onto the axle bolt head. Picked up a bathroom scale and held the face of it vertically against the extension and pushed and read the pounds.

Best,

[RONSIM]

Just did mine ------ as posted before, but the fish scale hooked right up --- set mine to 28lb, tire at 42lb and cured nose wheel shimmy.