VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12/RV-12iS
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-13-2013, 08:24 PM
RV12Roger RV12Roger is offline
 
Join Date: Oct 2010
Location: Aguanga, Ca
Posts: 55
Default Help with wireing the Music Input jack and Pitch Trim Servo

The Music Input jack is connected to the WH-RV12-Tunnel connector with 2 white wires and a green one that is attached to the shielding of the 2 wires. The 2 white wires connect to #1 and #20. Van's schematic does not show the position the green wire pin is inserted. Where should this green wire terminate.

The schematic does show the jack grounded (line to triangle). Is this ground simply indicating the jack is screwed to bare aluminum and is therefore the jack is grounded?

Pitch Trim Servo wires are also connected to WH-RV12-Tunnel connector with 5 wires. The 2 white wires are in question. When I originally installed the wire harness many moons ago I marked one of the white wires "+Trim Nose Up". My guess is that these 2 white wires must be in the right pin socket, #31 or #32 or the trim would operate in reverse. I might have put power to the wire back in the day to confirm direction??
Does it matter which socket the white wires go in? Do you designate direction in the Dynon or ?

Thanks for any help out there.

Roger Chastain
Reply With Quote
  #2  
Old 08-14-2013, 12:53 PM
RV12Roger RV12Roger is offline
 
Join Date: Oct 2010
Location: Aguanga, Ca
Posts: 55
Default False Alarm

I guess I worked too last night. Both answers were right in front of me this morning.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:53 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.