|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

04-02-2013, 07:53 PM
|
 |
|
|
Join Date: Feb 2010
Location: Gardnerville Nv.
Posts: 2,828
|
|
Step finish?
Question for those folks who are flying with a wheel up front, what did you do with the finish on the step, I saw one in Stead that chrome steps, and just wondering if paint would hold up, or if plating is a better option.
__________________
7A Slider, EFII Angle 360, CS, SJ.
|

04-02-2013, 09:07 PM
|
 |
|
|
Join Date: Jun 2007
Location: Merritt Island, FL
Posts: 602
|
|
I powder coated mine. I didn't think that regular paint would hold up that well here. There is a potential for a color mismatch however.
__________________
Jeff Rosson
Repeat Offender
RV14 - Working on Empennage/Tail Cone
RV9A - Completed! First flight on July 18, 2012!
Based at Merritt Island, FL (KCOI)
VAF Number: 1170
----
Star Trek Quote: "Logically, it could work. Also, logically, there are a hundred variables, any one of which could put us in a worse position than we're in now." Mr. Spock in Return to Tomorrow
|

04-02-2013, 10:13 PM
|
|
|
|
Join Date: Dec 2011
Location: Meridian ID, Aspen CO, Okemos MI
Posts: 2,645
|
|
I was going to powder coat them, but never got around to it. I may still. My thought on color mis-match was just to do them black or paint over the powder coat to match. It wouldn't last great, but the step would be protected by the powder coating. After installing my steps after the floor was in, I do NOT want to replace them!
__________________
rockwoodrv9a
Williamston MI
O-320 D2A
Awaiting DAR Inspection
|

04-02-2013, 10:38 PM
|
|
|
|
Join Date: Mar 2007
Location: Sonoma County
Posts: 3,821
|
|
Paint works just fine. Just place a piece of 3M anti slip tape on the contact part.
__________________
VAF #897 Warren Moretti
2019 =VAF= Dues PAID
|

04-03-2013, 04:24 AM
|
 |
|
|
Join Date: Nov 2005
Location: Asheville, NC
Posts: 2,692
|
|
I accepted the risks of hydrogen embrittlement ( I also ground the weld to what is called a "sanitary finish" in the food industry) and plated them.
100 hrs so far. It is not long enough to claim success.
__________________
Bill Pendergrass
ME/AE '82
RV-7A: Flying since April 15, 2012. 850 hrs
YIO-360-M1B, mags, CS, GRT EX and WS H1s & A/P, Navworx
Unpainted, polished....kinda'... Eyeballin' vinyl really hard.
Yeah. The boss got a Silhouette Cameo 4 Xmas 2019.
|

04-03-2013, 07:32 AM
|
|
|
|
Join Date: Oct 2011
Location: Grindstone, PA
Posts: 143
|
|
No step, less drag. Keep it clean.
|

04-03-2013, 07:45 AM
|
 |
|
|
Join Date: Feb 2010
Location: Gardnerville Nv.
Posts: 2,828
|
|
I have powder coat on the Buckstop winch bumper on the truck, it has faded and is chipping, given it is parked outside, but still. What are the different methods of plating, and is one better than another, as far as no step, I think I would damage the flap or myself, probably myself. As far as speed, just add HP and other tricks.
__________________
7A Slider, EFII Angle 360, CS, SJ.
|

04-03-2013, 08:20 AM
|
 |
|
|
Join Date: Dec 2006
Location: Sumner, WA
Posts: 722
|
|
I painted mine and they still look great after a couple of years. Problem is the passenger side cracked (not from misuse). Since mine is nicely painted and clearcoated it going to be tough to change and then match. In hindsight powerdercoating may have been a better choice. (for matching)
Don't want to start a thread drift but it seems most passenger steps will eventually crack. Plenty of threads on "cracked steps".
Just something to think about.
__________________
Jeff Bloomquist
Sumner, WA
PP-ASEL, IR
RV-7A
Flying
1150 Hours
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:03 AM.
|