VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-13-2013, 08:00 AM
gib's Avatar
gib gib is offline
 
Join Date: Feb 2011
Location: Mesa, Az
Posts: 94
Default brass bushing for aileron pivot

Does anybody have the part number for the brass bushing that goes in the bell crank for the aileron (RV-7). I just messed mine up at work and need to order a new one but my prints are at home. Thanks for your help. Okay I know I spelled Pivot wrong, I tried to edit it but it will not allow me to.
__________________
Gib Donovan
Mesa, Az
Aerospace Sheet Metal Tech
Over Haul and Repair Manager
A&P
All Around Good Guy
RV-7
Empennage: Done
Wings: In Progress
http://www.mykitlog.com/users/index....b&project=2108

Last edited by Mike S : 03-13-2013 at 09:26 AM. Reason: spelling
Reply With Quote
  #2  
Old 03-13-2013, 08:22 AM
crabandy crabandy is offline
 
Join Date: Jan 2010
Location: Ottawa, Ks
Posts: 2,188
Default

I just looked at the plans and didn't see a part #, it is just referenced as brass bushing in drawing 15A RV-7. I would just call and reference the drawing # and Vans should be able to find it.
Reply With Quote
  #3  
Old 03-13-2013, 09:00 AM
cka357's Avatar
cka357 cka357 is offline
 
Join Date: Feb 2012
Location: Richmond, KY
Posts: 57
Default Aileron Bushings

gib,

The part numbers for the -7 bell crank is WD-421-L and WD-421-R.

I did a search on Vans in the parts section and found them.
Search for "bellcrank busing".

BELLCRANK BUSHING 789
BUSH-BS.245X375X2.781

$4.80

Good Luck,

Chuck
__________________
RV7 in Process
- Empennage Complete
- Wings and Fuel Tanks Complete
- Fuselage In Process
Dues Paid 10/16

http://mykitlog.com/cka357[/url]
Reply With Quote
  #4  
Old 03-13-2013, 09:27 AM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
Default

Quote:
Originally Posted by gib View Post
Okay I know I spelled Pivot wrong, I tried to edit it but it will not allow me to.
Got that taken care of for you.
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #5  
Old 03-13-2013, 09:55 AM
gib's Avatar
gib gib is offline
 
Join Date: Feb 2011
Location: Mesa, Az
Posts: 94
Default

Thank You Gentlemen another disaster averted.
__________________
Gib Donovan
Mesa, Az
Aerospace Sheet Metal Tech
Over Haul and Repair Manager
A&P
All Around Good Guy
RV-7
Empennage: Done
Wings: In Progress
http://www.mykitlog.com/users/index....b&project=2108

Last edited by gib : 03-13-2013 at 10:10 AM.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:19 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.