|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

09-26-2006, 10:56 PM
|
|
|
|
Join Date: Dec 2005
Location: Yuba City, Ca
Posts: 10
|
|
Getting in and out of the tip up!
Ok, I guess this only applies to the tippers out there. I'm currently working on my 9A fuselage and have decided to install some of those beautiful Classic Aero leather seats. A big concern of mine is getting in and out of the cockpit without messing up the seats by stepping all over them with dirty/muddy shoes, etc. I've flown in many sliders and have used the roll bar to manuver somewhat (still seems like the seats take a beating) but with the tip up it's not that stable. Any suggestions?
Wes Jones
RV-9A - Fuselage
|

09-27-2006, 04:29 AM
|
|
|
|
Join Date: Jul 2005
Posts: 293
|
|
I'm not at that stage yet and was wondering the same thing. In the Grumman Tiger I've flown, the seat cushion isn't fastened in the front, and you can tip up the bottom cushion with the toe of your shoe, and slide that shoe under the cushion and on to the bare seat bottom. Then swing your other foot in and on to the floor while holding the forward part of the canopy. Then you just sit down. Don't know if the RV cushions need to be fastened in the front or not.
Hope this helps.
__________________
Tom Costanza
RV-7A Fuse
|

09-27-2006, 05:22 AM
|
|
unqualified unfluencer
|
|
Join Date: Jan 2005
Location: Highland Village, TX
Posts: 4,088
|
|
Rag
Hi Wes,
For the first few months I'd take my shoes off before getting in - then I'd put my shoes back on in the plane.
Then for years I opened up a rag and left it on the seat (when I got out of the plane). I'd step on that while getting in, then roll it up and stow it between the seat and side of the fuse. Shoes on.
Now I just get in with shoes on. I clean the seats with a leather cleaner every few months.
With your left hand on the side rail and your right hand on the top of the passenger seat you can get in pretty easily.
B,
D
Quote:
|
Originally Posted by WJONES
Ok, I guess this only applies to the tippers out there. I'm currently working on my 9A fuselage and have decided to install some of those beautiful Classic Aero leather seats. A big concern of mine is getting in and out of the cockpit without messing up the seats by stepping all over them with dirty/muddy shoes, etc. I've flown in many sliders and have used the roll bar to manuver somewhat (still seems like the seats take a beating) but with the tip up it's not that stable. Any suggestions?
Wes Jones
RV-9A - Fuselage
|
__________________
Doug Reeves (your host) - Full time: VansAirForce.net since '07 (started it in '96).
- Part time: Supporting Crew Member CAE Embraer Phenom 300 (E55P) @ KDFW.
- Occasionally: Contract pilot (resume).
|

09-27-2006, 06:03 AM
|
|
|
|
Join Date: May 2005
Location: Los Lunas, New Mexico
Posts: 187
|
|
Easy: FLY NEKKID.
No shoes, no problems!
It's possible for us airpark dwellers. Step out the kitchen door, open the hangar doors, go fly. From couch to cruise in ten minutes.
Whoa...too much coffee this morning...
__________________
Brian Denk
RV8 N94BD 425 hrs. SOLD.
'57 C-180 Skywagon aka "Shrek"
RV10 90% completed empecone kit FOR SALE $3k.
|

09-27-2006, 11:54 AM
|
 |
|
|
Join Date: Mar 2005
Location: ...
Posts: 2,049
|
|
You can get in and out of the tip-up side-by-side RV by stepping on the spar, not the seat.
__________________
Dan Checkoway RV-7
|

09-27-2006, 01:25 PM
|
|
|
|
Join Date: Dec 2005
Location: Yuba City, Ca
Posts: 10
|
|
Hey Dan,
Stepping on the spar (between the seats) is a good idea, however I thought it would be nice to put a map box or something between the seats to give you something to push off of when getting out. My buddy flies a 9A slider with a map box and it really helps. I guess once you get everything in place you just have to find something that works!
Wes Jones
RV-9A - Fuselage
|

09-27-2006, 02:29 PM
|
 |
|
|
Join Date: Mar 2005
Posts: 397
|
|
Towel covers
My wife found nice towels that matched the seat color, cut them out in a U shape to exactly match the bottom seat cushion and took them to a tailor and had the edges mended. Looks nice and fits the seat exactly so we step on them getting in and out... Total cost including the tailor was about $30.
__________________
Rusty "Rooster" Williams
N357RV RV-7A Tip Up (flying and Painted!) - 1560+ hrs.
Superior XP-360, carbureted, Hartzell 74" Blended Airfoil Prop
Grand Prairie, TX
KGPM
|

09-27-2006, 03:04 PM
|
 |
|
|
Join Date: Mar 2005
Location: Dallas area
Posts: 10,768
|
|
Left hand, left side rail, right hand, roll bar, right foot over seat cushion, left foot over seat cushion, slide down.
__________________
Mel Asberry, DAR since the last century.
EAA Flight Advisor/Tech Counselor, Friend of the RV-1
Recipient of Tony Bingelis Award and Wright Brothers Master Pilot Award
USAF Vet, High School E-LSA Project Mentor.
RV-6 Flying since 1993 (sold)
<rvmel(at)icloud.com>
|

09-27-2006, 04:49 PM
|
 |
|
|
Join Date: May 2005
Location: Canby, Oregon
Posts: 1,786
|
|
I have the classic areo seats
I keep a small towel and have used it some times but my usual process is:
From wing - right foot to between seats (behind fuel selector.
Move weight over to right foot (right hand and weight on roll bar).
Left foot to top of gear weldment (9A model).
Lower weight along roll bar and seat back until down (left hand on side).
Reverse the process to get out.
The seats are great, but the shoulder seat belts don't seem to have a good routing around that nice headrest. I have talked to Luke at classic aero about some way to route them better and am going to fly down to have him brain storm how to manage them better (I am only 30 miles north of him).
I think that some kind of bunge cord to hold them in position would work.
Kent
__________________
Kent Byerley
RV9A N94KJ - IO320, CS, tipup
AFS 3500, TT AP, FLYING....
Canby, Or
|

09-27-2006, 06:54 PM
|
 |
|
|
Join Date: Feb 2005
Location: Torquay, Victoria, Australia
Posts: 826
|
|
Wrong way.
Try the 'unnatural' way.
Step in with left foot first and place it straight on the floor and follow with the right.
I'm only 5'11" and fairly solid at 87KG (=200 US Kilo Carrots)
Pete.
__________________
Peter James.
Australia Down Under.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:50 PM.
|