Cavanaugh Bay (ID) PIREP? - Page 2

		VAF Forums > Regional Forums > Northwest
Cavanaugh Bay (ID) PIREP?

Page 2 of 2

Thread Tools

Search this Thread

Display Modes

#11

02-06-2013, 08:34 PM

Cipher

Join Date: May 2011

Location: Longview WA

Posts: 22

Oil cooler

Hey Steve, yes it was. The tubes feeding the cooler were touching the plenum and created a hole. When I did the Top Overhaul, I put the Vans Oil Cooler on it with a new Baffle and all is good!

When I landed I had already lost about 3 quarts. - the airplane looked like it came from a Star Wars Dog fight - oil all across the fuselage, inside and underneath everything.

__________________
George Ford
RV-4 N83SB Flying 0320 160hp CS
RV-8 N848MC Flying IFR IO360 CS
RV-8 QB Fuselage in progress.
APRS KA7PHJ-11

Page 2 of 2

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -6. The time now is 02:33 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.