VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12/RV-12iS
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-26-2013, 09:14 AM
Jennafly Jennafly is offline
 
Join Date: May 2012
Location: La
Posts: 10
Default Freezing the Engine Over Night

Does anyone know how to handle freezing conditions for the 912 ULS, when the plane has to be left out overnight and it's sub-freezing? Like on a cross-country trip with no pre-heat available?

How well does the antifreeze work?

Thank you for any thoughts.

Jen
Reply With Quote
  #2  
Old 01-26-2013, 03:05 PM
Dave12 Dave12 is offline
 
Join Date: Oct 2010
Location: Elkton, Md.
Posts: 1,654
Default

Jen, the specific anti-freeze that you used should have the freezing limits on the container. In any case, I think the 912 operating limits are somewhere around -13 to 120 degrees.
__________________
Wag Aero Sport Trainer built,sold and wrecked
N588DF RV12 #336 built, sold and alive and well in New York
N73DF RV12 #244 built, sold and alive and well in Florida
N91 RV RV9 I wish I could say I built this one! Mark Santoleri hit the ball out of the park on this gem.
Currently restoring a 1978 Citabria GCBC
Reply With Quote
  #3  
Old 01-26-2013, 07:08 PM
Bill_H's Avatar
Bill_H Bill_H is offline
 
Join Date: Aug 2010
Location: Marshall TX (KASL)
Posts: 1,783
Default

Searching for "preheat" finds lots of inexpensive options. this one could be carried with you and just depends on pulling the plane close enough somewhere for an extension cord to reach. Use a couple of feet of metal flex tube instead of the hard duct and simply pinch the end a bit - I'm making one like that. The Reiff headed bands for the oil tank get good reviews also. http://www.vansairforce.com/communit...ad.php?t=51470
Reply With Quote
  #4  
Old 01-28-2013, 06:47 AM
Limey Limey is offline
 
Join Date: Dec 2012
Location: Pentwater, MI
Posts: 17
Default

Don't know if this helps or not with a Rotax engine, but the technique is useful in old car engines: If possible, crank the engine over a few times to build oil pressure BEFORE turning on the ignition! This gets lube to the bearings and cam surfaces before any real load is put on them.

I used a sump mounted Reiff type heater on my Cherokee for years - it worked really well, especially with a blanket over the cowl and the cooling ducts plugged. In the winter I would leave it on 24/7 with no adverse effects.

Another thing to remember is that it is a bad idea to put the engine through heating/cooling cycles when it is not running. This draws moisture laden air into the engine which "may" condense. If you do not keep the heater on 24/7, then only heat it prior to starting the engine - and run the engine at operating temps for a good half hour to drive out any condensation!
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:00 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.