VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 01-09-2013, 09:31 PM
idleup idleup is offline
 
Join Date: Oct 2005
Location: San Antonio, TX
Posts: 281
Default AeroLED NS-90 Electrical Question...

In the manual for AeroLED it states that the peak load is 2.4A for each strobe. The duration of the this load is quite short 0.33 seconds. The wiring for each strobe is 20AWG(Shielded). What size fuse should I use to protect these three strobes? If I add up those three loads it is 7.2A so I thought maybe a 10A fuse. But since the duration of the load is so short I am wondering if I am putting too large of a fuse...

Anyone else with this setup could you please advise?

Thanks,
__________________
Matt Johnson
RV-7A Finishing Kit
http://www.rv7a.com
Reply With Quote
  #2  
Old 01-09-2013, 10:11 PM
Dbro172's Avatar
Dbro172 Dbro172 is offline
 
Join Date: Apr 2012
Location: West Fargo, ND
Posts: 1,073
Default Read the current instructions

http://www.aeroleds.com/LinkClick.as...6270&mid=13206

The directions here, right on the wiring diagram..... Budget 3A per strobe and use a 7A or 10a breaker (presumably for two vs. three strobes.)
__________________
Derek Hoeschen
EAA Tech Counselor
RV-9A #92103 - N803DK
G3X, Superior XO-320, Dual Pmags, Catto 3B
www.mykitlog.com/dbro172/

1974 Bellanca Super Viking - N16AW - Flying
RV-8 #83565 - N184DK - building
1968 Mooney M20C - N6801N - Sold
1956 C-182 - N744W - Sold
Reply With Quote
  #3  
Old 01-09-2013, 10:17 PM
idleup idleup is offline
 
Join Date: Oct 2005
Location: San Antonio, TX
Posts: 281
Default

Thanks Derek, that is what I needed.
__________________
Matt Johnson
RV-7A Finishing Kit
http://www.rv7a.com
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:07 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.