VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 12-07-2012, 09:22 PM
Stan Bahrns Stan Bahrns is offline
 
Join Date: May 2005
Location: Effingham, IL
Posts: 68
Default motor mount washers

My large washers on the bottom two mounts are both either too close to the mount & one is touching. anyone having that problem?

RV12 builder
RV7A 350 hrs
N868B
__________________
Stan Bahrns
RV-7A QB
N868B 365 hrs
RV12 40 hrs
Effingham,(southern) ILL
Reply With Quote
  #2  
Old 12-08-2012, 01:47 AM
Gagarin737's Avatar
Gagarin737 Gagarin737 is offline
 
Join Date: Mar 2009
Location: Netherlands
Posts: 663
Default

Yep, you're not the only one;

other thread

__________________
PH-BZT

MyKitlog
Reply With Quote
  #3  
Old 12-10-2012, 12:03 PM
RVTrumpet's Avatar
RVTrumpet RVTrumpet is offline
 
Join Date: Jun 2012
Location: Hillsboro, OR
Posts: 63
Default

Funny you mention that. We had that same problem on Saturday. The bottom right one slipped on fine, but the one on bottom left did not. We ended up grinding down the interfering part of the washer. It fit fine after that.
__________________
RV addict for life.

NOTE: The information, ideas, and opinions presented in this post are my own and not those of my employer. Build, test, and fly at your own risk.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:33 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.