VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-8/8A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-28-2012, 02:20 PM
Dennis_I's Avatar
Dennis_I Dennis_I is offline
 
Join Date: Dec 2005
Location: Sweden, 67" North
Posts: 68
Default Showplanes fastback, anchor nuts & screws?

Hi!
What kind of anchor nuts and screws did you use for the "glare shield"? Any part numbers? i will have to order the bits from US (Van?s) Here in Sweden it?s all metric

Regards

Dennis
__________________
Dennis Isaksson
G?llivare, Sweden

Grew up with an RV-4, SE-XIO

Now: RV-8, Showplanes Fastback. #83218 Under construction, SE-XXO

Engine and avionic installation in progress
Reply With Quote
  #2  
Old 12-03-2012, 08:31 AM
tadsargent's Avatar
tadsargent tadsargent is offline
 
Join Date: Jan 2006
Posts: 307
Default screws

Dennis, I used #6 screws and platenuts for the fiberglass to forward top skin, then just nyloc nuts for the instrument panel rather than platenuts.
Regards
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:46 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.