Quote:
Originally Posted by Ironflight
I have a Delta 4" wide belt/6" disk and use it for all sorts of stuff. The disk is outstanding for squaring up the ends of angle or grinding in a specific angle.
Paul
|
Same for me.
120 grit on the belt and 80 on the disk.
Just remember, NEVER use the same belt and disk on both aluminum and steel! If you do, then you will push steel bits into the aluminum, which will cause corrosion.
Also, DO NOT use a bench grinder on aluminum!
__________________
Bill R.
RV-9 (Yes, it's a dragon tail)
O-360 w/ dual P-mags
Build the plane you want, not the plane others want you to build!
SC86 - Easley, SC
www.repucci.com/bill/baf.html