I'm curious how the ADS-B compliance update will be implemented. Will this be through additional data packets on the existing Aviation Out serial data stream? And if so, will there be some setup option that enables the new packets?
Talking to a technician who had the text of the service bulletin, it wasn't completely clear.
I have only one serial output pin from my 430W. This is connected to an input on my Skyview display. My hope was that I could use this serial out to connect to the Trig transponder input pin.
If the ADS-B out data compliant data stream requires a seperate serial port output from the 430W, that means a new pin in that high density connector buried in the back of the panel.
