Yes minor typo on the bottom three wires. They just cut-n-pasted from the power lines.
The point they were trying to make was 20g wire for a 28V system and 18g wire for a 14 V system on both the ground lines and the power lines.
For the bottom three pins it should read
20 AWG (28 VDC system)
18 AWG (14 VDC system)
You should check what note 3 - the 3 inside the triangle - says though.
__________________
Gil Alexander
EAA Technical Counselor, Airframe Mechanic
Half completed RV-10 QB purchased
RV-6A N61GX - finally flying
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ
Last edited by az_gila : 10-17-2012 at 09:41 AM.
|