This is the second panel for N941WR. The original is back on page 15
of this thread.
That is a 10" Dynon SkyView on the left, Garmin 496 at the top of the radio stack, Sigtronics 200S and ELT panel under the 496, and iCom A210.
On the right side is a Dynon D1 PocketPanel and below that is the EICommander.
Further to the right is my dual power port and last but not least is the Carbon Monoxide detector.
In the center is a DJM throttle quadrant, which I highly recommend.
The 496 was left in the plane because I knew how it worked and it gives me weather.
Missing from the picture is the transponder. That is now incorporated into the SkyView, thus no panel space is taken up by it.
This has turned out to be a very functional VFR panel and easy to fly with, not to mention easy to make.