VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #11  
Old 09-15-2012, 08:56 AM
db9469 db9469 is offline
 
Join Date: Jun 2009
Location: Dallas, TX
Posts: 31
Default

Ed-Use CR3214-4-2's in the two verticle holes. These are 1/8" diameter rivets with reduced heads (same countersink as -3 solids) so you'll need to upsize the holes to #30. Use CR 3214-4-4 in the hole common to the longeron. Same thing applies. You will need to upsize the hole to #30. You can pull them with a standard set of pop rivet pullers.
Reply With Quote
  #12  
Old 09-15-2012, 11:30 AM
N9331v's Avatar
N9331v N9331v is offline
 
Join Date: Jan 2010
Location: Hampshire, IL
Posts: 276
Default

Hey thanks for the rivet info. I just finished up with my canopy and was getting back to that section this weekend.

Ed
__________________
Ed Martin
Bluskydtl
RV7
DKB
Donations 1/19 & 6/19
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:22 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.