Quote:
Originally Posted by scsmith
Sorry, putting the flop tube in is not this easy. But I've done it. You have to take the tank off the wing. The flop tube pick-up installs way up toward the leading edge in the root rib. Then, you have to install a couple of parts inside that prevent the flop tube from getting hung up in a corner. And, since the flop tube would interfere with the usual location for the fuel level sender, you must move the fuel level sender to the next bay outboard by cutting a hole in the back of the tank.
|
I hope I can do the job quickly.
I'm waiting for Raven kit, and the series of hydraulic fittings.
I will try again for your help ...... I'm sure

Marco