VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12/RV-12iS
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-12-2012, 03:51 PM
FredC FredC is offline
 
Join Date: Nov 2010
Location: Shalimar, Florida
Posts: 10
Default Skyview Conversion, Figure 2, page 42D-20

I am doing a Skyview Conversion, Step 5 and Figure 2 on page 42D-20 were initially very confusing to me. Here are some notes I made after figuring this out.

This part of the conversion requires wiring harnesses WH-00026 and WH-00026 Rev-1 Kit (also known as Fix-1) supplied in the Skyview Conversion Avionics Kit.

On the left side of Figure 2, I labeled RZ942 and RZ943 as wires in the WH-00026 Rev-1 Kit. On the right side of Figure 2, I labeled RZ194 as the Pilot Headset Harness, and RZ195 as the Co-Pilot Headset Harness. Also on the right side, RZ944 is in the WH-00026 Rev-1 Kit.

I then cut off the male pins from the Pilot and Co-Pilot Headset Harnesses and spliced on the WH-00026 Rev-1 wires as shown in Figure 2.

At the top of Figure 2, I labeled the "OPTIONS" and "AUTOPILOT" connectors with "REAR VIEW/PIN INSERTION SIDE."

I then removed the backshells from the OPTIONS and AUTOPILOT connectors, inserted the pins from RZ941, RZ942, RZ943, RZ944, and reinstalled the backshells.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:00 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.