I did as Mahlon suggested and it does appear things are better. The mag drop for the PMAG is around 100 and perhaps 150 for the Slick mag. So, things appear to be in spec now. There is still some roughness at idle, but I think I am getting 50 to 100 RPM increase at full rich idle when I lean the mixture out to cut off, so the setting may be too rich. (I say "think" as the RPM jumps around so much it is difficult to really tell what I have.)
Thanks for all the help and suggestions.
__________________
Jeff Rosson
Repeat Offender
RV14 - Working on Empennage/Tail Cone
RV9A - Completed! First flight on July 18, 2012!
Based at Merritt Island, FL (KCOI)
VAF Number: 1170
----
Star Trek Quote: "Logically, it could work. Also, logically, there are a hundred variables, any one of which could put us in a worse position than we're in now." Mr. Spock in Return to Tomorrow
|