VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-08-2012, 03:05 AM
RV6AussieNick RV6AussieNick is offline
 
Join Date: Jun 2010
Location: Brisbane Australia
Posts: 166
Default Missing Fig photo's

Hi Guys,

I'm getting close to mounting and rigging my Hori Stab and Vert Stab on my RV6, I've been reading threw my construction manual only to find more missing Figure photo's.

I'm after all of section 8 The Fuselage, Fig 8-10, Fig 8-11, Fig 8-12 (RV7 would be the same) the photo's show rigging and setting up the empennage, I'm not sure what happened to the photo's, I'm the 4th owner.. I've found that I'm missing a few other parts of the manual.

Thanks for your help.

Cheers,
__________________
Nick Purcell
Licensed on B767, A330 Eng/Airframe
Fixing up RV6, building a Stewart S51
Basically a major overhaul of everything.
Reply With Quote
  #2  
Old 07-08-2012, 03:43 AM
airtractor8 airtractor8 is offline
 
Join Date: Mar 2006
Location: Dardanup. Western Australia
Posts: 167
Default

Hi Nick

Here is the emp attach instructions from my circa 1993 RV6 builders manual with the relevant sketch page

http://i47.tinypic.com/2wognc8.jpg
http://i47.tinypic.com/v5lg8j.jpg


Hope it helps

Cheers
Graham in West Aus

Last edited by airtractor8 : 07-08-2012 at 03:56 AM.
Reply With Quote
  #3  
Old 07-08-2012, 06:48 AM
RV6AussieNick RV6AussieNick is offline
 
Join Date: Jun 2010
Location: Brisbane Australia
Posts: 166
Default that's what I'm looking for..

Hi Graham,

Thanks for the photo and instructions, that's exactly what I'm looking for.

Your instructions look to be the same as what I have, my manual is around 20 yrs old so at some point most of my figure drawings and photos have gone missing.

Cheers
__________________
Nick Purcell
Licensed on B767, A330 Eng/Airframe
Fixing up RV6, building a Stewart S51
Basically a major overhaul of everything.
Reply With Quote
  #4  
Old 07-08-2012, 08:15 AM
airtractor8 airtractor8 is offline
 
Join Date: Mar 2006
Location: Dardanup. Western Australia
Posts: 167
Default

Quote:
Originally Posted by RV6AussieNick View Post
Hi Graham,

Thanks for the photo and instructions, that's exactly what I'm looking for.

Your instructions look to be the same as what I have, my manual is around 20 yrs old so at some point most of my figure drawings and photos have gone missing.

Cheers
Your more than welcome to PM me if you need any more info and I'll dig it out and send it to ya
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:03 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.