Hey guys,
I am happy with the AutoCADWS diagram, for me they are easy enough to use if I were to need to.
But, with regard to the paper ones being printed and offered to share, be sure you are specific with which one you need, there are 3 diagrams:
1. For SkyView who have finish kits prior to 8/25.
2. For SkyView who have finish kits after 8/25
3. For Dynon 180 avionics shipped prior to 8/25.
Ten pages of 11X17 prints is a big package, especially if the wrong one.
Mead, Hal_San, I know you both have Dynon 180 planes, or have you converted to SkyView?
Tony