VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 04-14-2012, 06:51 AM
Bill.Peyton's Avatar
Bill.Peyton Bill.Peyton is offline
 
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,788
Default Powder coating baffles

Has anyone used powder coating on the baffles or other thin pieces of aluminum alloy materials. I had some powder coatings applied to my instrument panel inserts .064, but never to material a thin as the baffles. My concern is loss of temper from oven exposure at 400 deg for 15 min.

It seems as durable as the finish is, this would be a great way to finish the baffles.
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
Reply With Quote
  #2  
Old 04-14-2012, 06:58 AM
Grezdlitn Grezdlitn is offline
 
Join Date: Jan 2005
Location: Eagles Nest Estates (2TS6) Midlothian Tx.
Posts: 65
Default Loss of temper

Bill,
I know of several RV's here that have been using powder coating on their baffles without any issues. I'm not sure of the metalurgy but loss of temper doesn't occur untill much higher temperatures.
Mark
Reply With Quote
  #3  
Old 04-14-2012, 08:58 AM
GAHco's Avatar
GAHco GAHco is offline
 
Join Date: Dec 2006
Location: Paso Robles, CA
Posts: 1,177
Exclamation Why Powder Coat?

It would look cool, I would not do it unless it was going to be a show plane. Even at that powder coating is heavy and difficult to touch up if scratched or marred.

If you wanted the wow cool look, poly urethane paint properly applied is very tough and can be real good looking!

But powder coating is easier because someone else does it for you

"It's your thing, do what you wanna do!"
__________________
Get em in the Sky!
Tom Brink Pres.
GENUINE AIRCRAFT HARDWARE Company
www.gen-aircraft-hardware.com

www.gen-aircraft-hardware.com/site_tips.asp


28th Anniversary of GAHco March, 2012
Thanks for being part of our success
Dues Paid November 2012
Reply With Quote
  #4  
Old 04-14-2012, 09:19 AM
David Paule David Paule is offline
 
Join Date: Dec 2009
Location: Boulder, CO
Posts: 4,435
Default

I had the baffled on my Cessna 180 powder coated white. It was a good move. That was about 500 hours ago and they've held up very well. The heat from the engine hasn't affected them at all.

They look good but are surprisingly difficult to clean.

An unanticipated benefit is that when I'm poking around the engine, it's just a little brighter and easier to see.

I intend to do this on my RV-3B too, but that's a few years downstream. (Boxes from Van's about 2 weeks out right now.)

I had the engine mount powder coated as well and it discolored near the exhaust.

Dave
P.S. Yes, the heat affects the heat-treatment of the aluminum, but not much, and it's of no consequence. No cracks, no issues whatsoever.
Reply With Quote
  #5  
Old 04-14-2012, 01:35 PM
N15JB N15JB is offline
 
Join Date: May 2010
Location: Denver
Posts: 564
Default

I had a local shop anodize all my baffles for $50. Looks good, cleans easily an minimal weight gain.

Jim Berry
RV-10
Reply With Quote
  #6  
Old 04-14-2012, 04:49 PM
rleffler's Avatar
rleffler rleffler is offline
 
Join Date: Jun 2006
Location: Delaware, OH (KDLZ)
Posts: 4,196
Default

I know of several RV-10s that have powder coated baffles. I'm intending on doing mine in a few weeks.

Bob
__________________
Bob Leffler
N410BL - RV10 Flying
http://mykitlog.com/rleffler
Reply With Quote
  #7  
Old 04-14-2012, 08:08 PM
n82rb's Avatar
n82rb n82rb is offline
 
Join Date: Jan 2007
Location: fort myers fl
Posts: 949
Default

the power we use cures between 320 F and 392 F. which is well below the temps that are used for hardening and tempering, so it should not effect the base metal.

the powder we shoot should be shot at 3.5 mils thickness and that works out to 51.5 sq ft/ pound. not to much for a few sq/in of baffle.

bob burns
RV-4 N82RB
Reply With Quote
  #8  
Old 04-14-2012, 08:49 PM
Bill.Peyton's Avatar
Bill.Peyton Bill.Peyton is offline
 
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,788
Default

Thanks for all the replies. The powder coat finish is such a durable coating. I am going to use a Drylac product that has a satin finish in a little darker color than LYCOMING grey. The same finish I used on my panel inserts.
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
Reply With Quote
  #9  
Old 04-14-2012, 11:59 PM
RV6Danny RV6Danny is offline
 
Join Date: Apr 2012
Location: Livermore, CA
Posts: 25
Default Powder Coating

Bill,

I powder coated my RV-6 engine baffles. After 12 years and 800 hours they still look like brand new.

Danny
RV-6
N360DP
Reply With Quote
  #10  
Old 04-15-2012, 09:43 PM
yakdriver yakdriver is offline
 
Join Date: Aug 2006
Location: Twin Falls, ID
Posts: 683
Default

I powder coated my RV7 baffles and they stay clean and look great. I also powder coated all the .020 interior panels of the Cub and they came out really nice and it didn't warp the metal at all. Clean, light and scratch resistant finish. I also did the engine baffles. Don
__________________
RV 7 N212MD Flying as of 12/22/2007
Backcountry/TCOW Super Cub flying 03/12/2011
Next project?
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:44 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.