VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 03-26-2012, 11:05 AM
DaAV8R DaAV8R is offline
 
Join Date: Jul 2009
Location: Lee's Summit, MO
Posts: 749
Default Firewall question

I am assembling the firewall.

The drawings show F-801L on the engine side of the firewall. The plans state the firewall is back drilled thru the backing plate for the inflight adjustable rudder pedals. I am using ground adjustable pedals.

It is not clear to me whether the backing plate is omitted when using the ground adjustable pedals. The F-801L does tie together the reinforcement angles on the back of the firewall.

Are these backing plates used with ground adjustable pedals?

__________________
Robert Williams
Lee's Summit, MO
RV-8 - Empennage & Wings Done
Working on Fuse
O-360-A1A

1946 Cessna 120
Reply With Quote
  #2  
Old 03-26-2012, 12:54 PM
ChrisMallory's Avatar
ChrisMallory ChrisMallory is offline
 
Join Date: Dec 2009
Location: Richmond, TX
Posts: 71
Default

I have the ground adjustable pedals too. My F-801H-L/R-1's overlap and rivet to the horizontal reinforcement angle with no F-801L's.
__________________
Chris Mallory
A & P
Starting an RV-6
Prior RV-8
Richmond, TX
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:59 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.