Dynon Remote Compass

[Aden Rich]

Does anyone have a picture of the mounting setup for the their Dynon Remote compass in a RV-6/6A?
I have a D10A and will need to see how it gets mounted.

Thanks,
Aden

[pazmanyflyer]

Here you go.

http://safeair1.com/averytools/remotecompasspass.php

[billnaz]

No photos handy, but I made my own mount out of scrap in the hangar, and placed the unit on the center vertical stiffener towards the top of th fus. Works fine.

[OneCharlieKilo]

Here's page with pictures of my installation in RV-6A that has been working fine for 260+ hours:

http://rv6aproject.ckhand.com/panelA...l/panelPg5.htm

[N282S]

Reminds me of the bathroom at "Spankys".

Originally Posted by OneCharlieKilo

Here's page with pictures of my installation in RV-6A that has been working fine for 260+ hours:

http://rv6aproject.ckhand.com/panelA...l/panelPg5.htm

[flybill7]

I mounted the Remote Compass on my RV-7 Wingtip using the SafeAir1 Mounting Bracket.

Here's are some pics: Link

[Aden Rich]

I purchased the SafeAir unit.
Don't need to reinvent the wheel.
I appreciate the inputs.
One last question!
Can I run the remote compass wiring along side the strobe light wiring?
I have one power pack that will run both strobes so the wiring will have high voltage in it.


Thanks again,
Aden Rich

[OneCharlieKilo]

Reminds me of the bathroom at "Spankys".

yea, but it's sentimental graffiti so it has to stay! That was my youngest kid's contribution when she wanted to come out to the garage and help me work on the plane - notice it's upside down from when the fuselage was in the jig. I look forward to reviewing that graffiti every year when condition inspection time rolls around. She's in high school now and is proud to know it's still there! See thread on kids in the workshop, post #2:

http://www.vansairforce.com/communit...295#post588295

[N282S]

Originally Posted by OneCharlieKilo

yea, but it's sentimental graffiti so it has to stay! That was my youngest kid's contribution when she wanted to come out to the garage and help me work on the plane - notice it's upside down from when the fuselage was in the jig. I look forward to reviewing that graffiti every year when condition inspection time rolls around. She's in high school now and is proud to know it's still there! See thread on kids in the workshop, post #2:

http://www.vansairforce.com/communit...295#post588295

This interior picture is twenty times better than mine. I miss my kid "helping" me on my project. You're right! That is a great archival memory.

[Danger Will Robinson]

I too have purchased the Safe Air compass mount in anticipation of mounting my Dynon D10A in the wingtip. My RV6 has wingtip strobes too. I have the same question as Aden. Will this be an issue?