VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-18-2012, 09:33 AM
John R. Graham John R. Graham is offline
 
Join Date: Dec 2010
Location: Alpharetta, GA
Posts: 88
Default Stainless Steel for Paint Prep Sinks / Drying Area?

In my shop, I'm thinking about doing a stainless steel sink and drying board for preparing parts for priming (with a separate holding tank for proper disposal of Alodine rinse water).

Should I be concerned about galvanic corrosion between the aluminum and the stainless, and thus, perhaps, plan on an insulator on top of the drying board? Or, should I be considering something else altogether?

- John

Last edited by John R. Graham : 01-18-2012 at 12:06 PM. Reason: Better title.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:49 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.