Show us your RV-10 Panel - Page 18

sstellarv10 · #**171** 11-05-2011, 05:54 PM

Even though its only paper it keeps the motivation going.

N427EF · #**172** 11-06-2011, 08:41 AM

You almost had me fooled, I had to read the bottom part.

sstellarv10 · #**173** 11-06-2011, 08:46 AM

I had it printed at Staples, It really gives you a good feeling of how things will be situated and if it works. I've already made changes and I'm now looking at the layout on the Aerosport panel.

rdoerr01 · #**174** 11-11-2011, 09:22 AM

Here is my updated RV-10 Panel with the G3X.

Thanks

Ray
N519RV

flion · #**175** 11-11-2011, 11:00 AM

OOOOOOOOooooo! And you can quote me.

I like your vents outlets and their mounts. Source?

rdoerr01 · #**176** 11-11-2011, 07:58 PM

I custom built the mounts for the vents because on the earlier Fuse kits Van's made the cutout on the side skins too high and we had to fend for ourselves on how to mount the vents. So I took the part that had both the Naca Scoop and the back of vent bound together and I separated them so I could mount the vent under the instrument panel and then connected them with a small piece of scat tube.

Ray
N519RV

crabandy · #**177** 11-14-2011, 05:52 AM

Looks Great Ray!! Just in time for low ceiling season!

Bill.Peyton · #**178** 12-14-2011, 07:50 AM

Yesterday we powered up the panel for the first time after mounting in the airframe. We used the standard Aerosport panel. The inserts are fine texture powder coat.

Edit to fix link....

MauleDriver · #**179** 12-14-2011, 08:35 AM

Very clean, nicely laid out. Looks so simple that I know you put a lot into the design. One of the nicest out here. Congrats!!

ppilotmike · #**180** 12-14-2011, 08:54 AM

Very nice layout. I like that it doesn't look cluttered. Good Job.