|
-
POSTING RULES
-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|
09-27-2011, 08:53 PM
|
|
|
|
Join Date: Jan 2009
Location: Salt Lake City, Utah
Posts: 554
|
|
NICE looking
Beautiful job! Love the scheme!
__________________
A&P RV-10 Flying 1000+ hours
SuperSTOL Flying 170 hours
|
10-06-2011, 02:46 PM
|
 |
|
|
Join Date: Feb 2009
Location: Brooksville
Posts: 282
|
|
One Step at a Time
Nice progress!!! 
__________________
Weasel
RV-4 715hr Sold 
RV-10 "School Bus"
I have changed my User Name to the correct spelling as it became availible. Please direct all correspondence to Weasel
|
10-06-2011, 04:02 PM
|
|
|
|
Join Date: Dec 2007
Location: Peachtree City, GA
Posts: 144
|
|
Making Progress...
Bring on the doors.
__________________
Scott Flandermeyer
Rv-10 TDI 300 hrs
Fayettevile, GA
2020 VAF Donation complete 
|
10-06-2011, 09:53 PM
|
 |
|
|
Join Date: Jan 2005
Location: Clarion, Pennsylvania
Posts: 549
|
|
Scott, very nice. Looks identical to the airplane in my garage, and I think we have similar builder numbers too (784 for me).
-Andy
__________________
-Andy Turner
RV-10 N784JC
|
10-07-2011, 06:55 AM
|
|
|
|
Join Date: Oct 2005
Posts: 1,516
|
|
Nice work.
Keep going, the doors will get you another step closer.
__________________
Ernst Freitag
RV-8 finished (sold)
RV-10 Flyer 600 plus hours
Running on E10 mogas
Don't believe everything you know. 
|
10-07-2011, 09:28 AM
|
 |
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
|
|
Be sure you have the hinge assemblies in the correct locations when you put the doors on.
The hinges have the axis of the pivot line canted to the body of the hinge, to compensate for the curve of the cabin cover.
The two pivot axises should be in line when the hinge is mounted to the cabin cover.
If you have the front and rear hinges swapped, the hinge axis line will be way off, and cause binding of the door.
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010
Phase 1 done, 2/4/2011
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|
10-11-2011, 06:31 PM
|
|
|
|
Join Date: Feb 2009
Location: Southbridge,MA
Posts: 193
|
|
And then there was one
Well its been a long time coming ( four and a half years to be exact) and finally the tailcone was mated to the fuselage this weekend. Everything connected perfectly and its just about time to sit in it and make airplane noises 
__________________
Steve Stella
#40654 Finishing
N521RV reserved
|
10-11-2011, 07:33 PM
|
 |
|
|
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,785
|
|
Congratulations! Don't let anyone catch you making airplane noise.....
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
|
10-12-2011, 08:47 AM
|
 |
|
|
Join Date: Jan 2010
Location: Denver, CO
Posts: 1,964
|
|
Well Done!
Looks great. Very inspiring to me especially. Back to the shop! |
10-13-2011, 07:36 AM
|
 |
|
|
Join Date: Dec 2007
Location: Flagstaff, AZ
Posts: 2,647
|
|
Well, I'm working to catch up. Last night the local EAA chapter turned out before our meeting to help flip the main fuselage and the next tasks are to add the gear towers to finish section 29 and then join the tail cone. I found it easier to rivet the fuselage sides while it was upside down; I had better access to the rivets at the bottom bends and the bucker was able to sit relatively comfortably under the fuselage and reach up rather than sitting on the unfinished structure and hunkered over to reach rivets at the bottom.
Anyway, here's a link to the video: http://youtu.be/e-shaHZCZyQ. It's not a quality production, just a camera on a tripod while I try to organize a bunch of rugged individualists. The actual flip is at about 3:50 into the video.
__________________
Patrick Kelley - Flagstaff, AZ
RV-6A N156PK - Flying too much to paint
RV-10 14MX(reserved) - Fuselage on gear
http://www.mykitlog.com/flion/
EAA Technical Counselor #5357
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 10:41 AM.
|
