VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-10
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 09-03-2011, 05:19 PM
Wayne Gillispie Wayne Gillispie is offline
 
Join Date: Apr 2009
Location: USA
Posts: 1,499
Default

Brkt+servo= 15/16", so I would use AN23-20 or AN526C-1032R20. Then a AN364-1032A thin nut with AN960-10L washer.
__________________
Good judgment comes from experience, and a lot of that comes from bad judgment.
Reply With Quote
  #12  
Old 09-03-2011, 05:34 PM
Bill.Peyton's Avatar
Bill.Peyton Bill.Peyton is offline
 
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,788
Default

Steve, You are correct, it is 10-32. That is what I ordered AN526C-1032R20 from ACS.

Wayne, One of these days I need to fly over and see your project!
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
Reply With Quote
  #13  
Old 09-03-2011, 05:36 PM
murphmoose murphmoose is offline
 
Join Date: Apr 2007
Location: Wisconsin
Posts: 15
Default

The an23-20 doesn't work because the servo is threaded and the 15/16" grip length doesn't fit through the threads. Wondering if that is why a #8 was used. I will use a ms24693 I think. Or an AN 526

Steve
Reply With Quote
  #14  
Old 09-03-2011, 06:34 PM
Bill.Peyton's Avatar
Bill.Peyton Bill.Peyton is offline
 
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,788
Default

The AN526C-1032R20 is a countinuous thread #10 screw. http://www.aircraftspruce.com/catalog/hapages/an526.php
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
Reply With Quote
  #15  
Old 09-03-2011, 08:17 PM
Wayne Gillispie Wayne Gillispie is offline
 
Join Date: Apr 2009
Location: USA
Posts: 1,499
Default

Steve, i did forget to mention drilling threads out with #12 drill bit when using AN23-20. Sorry.

Bill, come over on a Sat in about 3-5 weeks, PMH, restaurant on field. I am hoping to have Andy Turner(RV-10) down from PA too. I will let you guys know. HVAC work is finally slowing some. My cell: 606-316-niner,zero,two,zero.
__________________
Good judgment comes from experience, and a lot of that comes from bad judgment.
Reply With Quote
  #16  
Old 09-03-2011, 08:40 PM
Bill.Peyton's Avatar
Bill.Peyton Bill.Peyton is offline
 
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,788
Default

Wayne,
Sounds Great.... Send me an email when you no more
Bill
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
Reply With Quote
  #17  
Old 09-08-2011, 08:59 PM
Bill.Peyton's Avatar
Bill.Peyton Bill.Peyton is offline
 
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,788
Default

Below are photos of the pitch servo bracket modification I came up with to prevent the torque arm from swinging loose should the cable break or come off the pulley (I know, the screw is now two short). The nylon does not come in contact with the torque arm.
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
Reply With Quote
  #18  
Old 12-22-2011, 08:24 PM
CharlieWaffles's Avatar
CharlieWaffles CharlieWaffles is offline
 
Join Date: Nov 2010
Location: West Linn, Oregon
Posts: 1,351
Default

What nut are you guys using for the AN526C-1032R20 near the forward portion of the servo? The screw just on top of the forward portion where the DB cable plugs into. I can't get a 1032 nut on there as it's too close to the enclosure.
__________________
CharlieWaffles - But you can call me "Mark"
RV-10
N928MT
Flying - AKA Still Tinkering
Build Project Site
Reply With Quote
  #19  
Old 12-22-2011, 09:15 PM
Bill.Peyton's Avatar
Bill.Peyton Bill.Peyton is offline
 
Join Date: Sep 2009
Location: St. Louis, MO
Posts: 1,788
Default

I believe it is an ms21042-3 locking nut. It is the same style as the ones provided by vans to attach the delrin blocks to the doors.
__________________
Bill Peyton
RV-10 - 1125 hrs
N37CP
First Flight Oct 2012
Aviation Partners, LLC
Reply With Quote
  #20  
Old 12-23-2011, 09:08 PM
rsipp rsipp is offline
 
Join Date: Jan 2005
Posts: 49
Default

Ditos to David's comments. I too have 400 hours of trouble free service with the standard supplied servo set ups.

Dick Sipp
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:08 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.