|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

08-24-2011, 07:52 PM
|
 |
|
|
Join Date: Jan 2005
Location: NC25
Posts: 3,507
|
|
IF you cannot beg, borrow, steal, or make one, I suggest buy one then sell in on VAF.
http://www.aircraftspruce.com/catalo...nstalltool.php
__________________
Gary A. Sobek
NC25 RV-6 Flying
3,400+ hours
Where is N157GS
Building RV-8 S/N: 80012
To most people, the sky is the limit.
To those who love aviation, the sky is home.
|

08-24-2011, 08:37 PM
|
 |
VAF Moderator / Line Boy
|
|
Join Date: Jan 2005
Location: Dayton, NV
Posts: 12,256
|
|
I have used the "Screwdriver on the nut with a hammer" trick a few times - it works in a pinch, but the time I borrowed the correct tool it took about a minute. Making one out of a cheap wrench is more satisfying!
Paul
__________________
Paul F. Dye
Editor at Large - KITPLANES Magazine
RV-8 - N188PD - "Valkyrie"
RV-6 (By Marriage) - N164MS - "Mikey"
RV-3B - N13PL - "Tsamsiyu"
A&P, EAA Tech Counselor/Flight Advisor
Dayton Valley Airpark (A34)
http://Ironflight.com
|

08-24-2011, 08:59 PM
|
|
|
|
Join Date: Sep 2007
Location: Florence, AL
Posts: 626
|
|
Gonna try and beg/borrow one tomorrow. If I can't, I'll try and make one.. Then, I might buy one. 
|

08-24-2011, 09:06 PM
|
|
|
|
Join Date: Jun 2005
Posts: 846
|
|
pump
pull the right mag off
|

08-26-2011, 09:53 AM
|
|
|
|
Join Date: Sep 2007
Location: Florence, AL
Posts: 626
|
|
Hammer and screw driver got it done. 
|

08-27-2011, 09:31 AM
|
 |
|
|
Join Date: Feb 2007
Location: Sutter Creek, CA
Posts: 842
|
|
Quote:
Originally Posted by Tram
Hmm.. $35 tool for a onetime job. Maybe the local AP will have something I can borrow. 
|
Tram,
What makes you think that changing a vacuum pump is a one time job?? It is not something that you use all the time, but when you need it...you need it! If it takes a $35 tool to get your $70K airplane back in the air.....Well, welcome to aviation.
So let me get this straight. You don't want to pay the "local A&P" to change your vacuum pump, but you want to borrow his/her special tool's to do the job?! Am I the only one who sees the irony here??
Flame suit on! Fire away!
__________________
Mark Ohlau
RV-6 N506MM VAF #1410
2017 Donation Made
|

08-27-2011, 10:46 AM
|
 |
|
|
Join Date: Jul 2010
Location: Orlando, FL
Posts: 1,077
|
|
Quote:
Originally Posted by jetjok
Tram,
What makes you think that changing a vacuum pump is a one time job?? It is not something that you use all the time, but when you need it...you need it! If it takes a $35 tool to get your $70K airplane back in the air.....Well, welcome to aviation.
So let me get this straight. You don't want to pay the "local A&P" to change your vacuum pump, but you want to borrow his/her special tool's to do the job?! Am I the only one who sees the irony here??
Flame suit on! Fire away!
|
Posts 3 & 9 Tram says that this is a one time deal, installing an EFIS, vacuum system being removed. I had the same situation when I pulled my pump, and used the hammer and screwdriver method. Bolted on a cover plate since I completely removed the vac system. Seems that purchasing a $35 tool for one use would not be as efficient as spending $35 on a tool that gets more use. I'm all for spending money on tools, just ask my wife!!! 
__________________
Chris Smith
Maule M5-180C (Sold)
RV-6 O-360 CS (Sold)
RV-4 O-360 FP (Sold)
Full-time in the other type of RV....
|

08-27-2011, 12:01 PM
|
 |
|
|
Join Date: Oct 2009
Location: Broken Arrow OK
Posts: 183
|
|
Quote:
Originally Posted by RVadmirer
When I picked up my plane the pump was dead and I insisted on a new one for the trip cross country. Ordered one overnighted from Cal to FL and watched the mech. install. He used a flat blade screwdriver and light hammer to loosen the nut and re-tighten it. He was very careful and tapped lightly on the lobes as needed to loosen and reinstall. Still doing well after 507 hours.
Would love to pull it and clean it so it goes another 500 hours, as I hear they can if one routinely cleans them, but it's a process....
Good luck.
|
Exactly what I used.
|

08-27-2011, 12:30 PM
|
|
|
|
Join Date: Aug 2007
Location: Houston, Tx
Posts: 163
|
|
Mechanics axiom
There is no such thing as too many tools! 
__________________
Bill S.
A+P, RV Dreamer + Schemer
RV-9 preplans in hand
|

08-27-2011, 09:13 PM
|
|
|
|
Join Date: Sep 2007
Location: Florence, AL
Posts: 626
|
|
Quote:
Originally Posted by jetjok
Tram,
What makes you think that changing a vacuum pump is a one time job?? It is not something that you use all the time, but when you need it...you need it! If it takes a $35 tool to get your $70K airplane back in the air.....Well, welcome to aviation.
So let me get this straight. You don't want to pay the "local A&P" to change your vacuum pump, but you want to borrow his/her special tool's to do the job?! Am I the only one who sees the irony here??
Flame suit on! Fire away!
|
jetjok... Thank you for your concern but please read the thread before giving your opinions... Click me...
Last edited by Tram : 08-28-2011 at 05:31 PM.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:47 AM.
|