VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-18-2011, 10:31 AM
Desertsky Desertsky is offline
 
Join Date: Apr 2010
Location: Reno,NV
Posts: 14
Default another canopy cutting question

Is it easier to cut the canopy with a angle die grinder or the standard grinder? I have to buy one. Is there a best die grinder? Thanks....
  #2  
Old 08-18-2011, 11:35 AM
rzbill's Avatar
rzbill rzbill is offline
 
Join Date: Nov 2005
Location: Asheville, NC
Posts: 2,692
Default Consider a vibrating saw/sander tool

If you are looking for a tool specifically for plexi, consider one of the vibrating saw tools. There is a range of them.

Fein = $$
Rockwell = middle $$
Harbor freight = Dirt cheap but functional

I bought the Harbor freight model and it worked perfectly for canopy and other plexi work. It is a LOT more controllable than a die grinder/cutoff disc for cutting plexi. Downsides of the cheap version is that it is very noisy and the gearbox gets hot.

See other thread:
http://www.vansairforce.com/communit...harbor+freight

If you don't have an air grinder at all and still want to go that way, I highly reccomend a small right angle unit. It is one of the handiest tools I have in the shop when combined with Roloc pads, sanding discs or the small scotchbrite wheels.
__________________
Bill Pendergrass
ME/AE '82
RV-7A: Flying since April 15, 2012. 850 hrs
YIO-360-M1B, mags, CS, GRT EX and WS H1s & A/P, Navworx
Unpainted, polished....kinda'... Eyeballin' vinyl really hard.
Yeah. The boss got a Silhouette Cameo 4 Xmas 2019.
  #3  
Old 08-18-2011, 11:47 AM
ArVeeNiner's Avatar
ArVeeNiner ArVeeNiner is offline
 
Join Date: Jun 2006
Location: San Jose, CA
Posts: 1,125
Default Ditto

I used the cheap Harbor Freight tool and it worked great. I posted back in July of 2010 with some links to a couple of You Tube videos showing me cutting mine. It's the way to go.
__________________
Kelly Johnson
San Jose, CA
RV-9A

Pink slip issued: 5/7/12

First flight: 5/28/12, Memorial Day.

Phase I Complete: 8/18/12!

2020 donation: complete
  #4  
Old 08-18-2011, 11:48 AM
pkill's Avatar
pkill pkill is offline
 
Join Date: Nov 2008
Location: North Central Oregon
Posts: 106
Default

We used Van's cutoff wheel in a RotoZip with 90* attachment

http://www.toolbarn.com/rotozip-zm3-1100.html

Did not have enough air pressure to power the angle die grinder whereas the electric RotoZip had plenty.

pk
  #5  
Old 08-18-2011, 03:52 PM
BSwayze's Avatar
BSwayze BSwayze is offline
 
Join Date: Jul 2007
Location: Molalla, Oregon
Posts: 955
Default

Well, I'm in the process of working on my canopy cuts right now as well. I have all three... the Harbor Freight vibrating tool, and both right-angle and straight die grinders... and I've tried them all. I ended up using the straight die grinder for most of my cuts so far. The right-angle die grinder works, too, but sometimes it gets in the way of itself, if that makes sense, depending on the orientation of the work and where your hands are at. The vibrating tool cuts the plexi okay but sort of melts its way through. I just slightly prefer the finish on the cut when using the cutting disk. So the straight die grinder is my preference. I hold the tool with both hands and put a finger out on the edge of the canopy to help position the tool and keep it from drifting around while I do the cut. I've been able to get remarkably precise cuts this way. That's my 2-cents worth.

By the way, as a side note, the most impressive tool that I've found to clean up the cut, break the edges, and even out any irregularities after the cut is finished, is the vixen file. It works great!
__________________
Bruce Swayze
RV-7A Standard Build
First flight November 3, 2019!
http://www.BrucesRV7A.com
  #6  
Old 08-19-2011, 12:01 AM
Stoo Stoo is offline
 
Join Date: May 2006
Location: LL10, Naperville, IL.
Posts: 68
Default

I used the Harbor Freight tool. Gives better control of the cut and less dust compaired to the die grinder. Don't get the Sears version---------- not as much power and more than twice the price, I took mine back!
Stewart
6, finishing
  #7  
Old 08-19-2011, 12:44 AM
Andrew M's Avatar
Andrew M Andrew M is offline
 
Join Date: Aug 2006
Location: Secluded Lake,Alaska (AK49)
Posts: 359
Default 90 Degree

I have both, and unless clearance is an issue, I find the 90 degree more controlable. Held so the tool body is 6 O'clock, the cutting or grinding should be done between 1 and 5 O'clock as the tool turns clockwise. The geometry is just right for control. A firm hand is required for the straight, and when it gets away its more likely to make a mess.
__________________
Andrew Miller
A&P, IA
-9 empennage
Wings arrived 12 JAN 13
https://plus.google.com/photos/11360...J-TuJPsmOONzQE
  #8  
Old 08-19-2011, 10:09 PM
Desertsky Desertsky is offline
 
Join Date: Apr 2010
Location: Reno,NV
Posts: 14
Default Thanks

Thanks for the great advice. Iam going to harbor Frieght tomorrow.
Closed Thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:44 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.