|
-
POSTING RULES
-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|
07-04-2011, 01:59 PM
|
|
|
|
Join Date: Jun 2009
Location: Columbus, TX
Posts: 98
|
|
Where can I get this part?
As a lesson learned the hard way, I have broken the nipple that connects my manifold pressure gauge to the aft side of the firewall. (see http://www.vansairforce.com/communit...ad.php?t=73153)
Can anyone help me identify the name or part number of the black plastic nipple that is broken in the following photos?
Thanks,
Troy
__________________
Troy Millican
CFI
Columbus, TX (66R)
RV-8A, purchased flying
Cessna 150F; Beech Baron B55
|
07-04-2011, 02:45 PM
|
 |
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
|
|
FLAPS should have it
That stands for "Friendly Local Auto Parts Store"
Take the pieces to one, bet they will be able to match it up.
Good luck.
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010 
Phase 1 done, 2/4/2011
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|
07-04-2011, 03:14 PM
|
|
|
|
Join Date: Jun 2009
Location: Columbus, TX
Posts: 98
|
|
Any idea what the mangled end looked like before I got through with it?
Is it a plastic version of the AN840-4D nipple? ( http://www.wicksaircraft.com/catalog...2d6bd9f3acef6f)
__________________
Troy Millican
CFI
Columbus, TX (66R)
RV-8A, purchased flying
Cessna 150F; Beech Baron B55
|
07-04-2011, 05:22 PM
|
|
|
|
Join Date: Oct 2005
Location: Geneva, AL
Posts: 491
|
|
Hose Barb
I'm guessing that it's a hose barb for 1/8" rubber type tube for the manifold pressure line. The questions would be if that's the correct size and then what thread is on the other end. When I did mine, I used a 1/8 hose barb x 1/4-28 threads on the other end. I then faced the bulkhead fitting, drilled the proper hole and tapped it 1/4-28.
Hope that helps.
__________________
Paul Rose
RV-9A 91300
N417PR
SERFI 2013 Awards
Inspection Complete!!! 7/7/12
First Flight 7/22/12
|
07-04-2011, 06:20 PM
|
|
|
|
Join Date: Dec 2006
Location: Tucson, AZ
Posts: 76
|
|
Barbed fitting
As I recall, it's a 1/8" pipe thread with a 1/8" barb fitting or maybe 1/16". Ace Hardware may carry it. Or you could try Home Depot. NAPA may also be a good source.
Charlie, RV-7 Tucson
|
07-04-2011, 06:31 PM
|
|
|
|
Join Date: Nov 2005
Location: Davis, CA
Posts: 1,156
|
|
Pretty sure that thread is 10-32, not pipe. Nipple is to fit 1/8" ID tubing. McMaster-Carr part number 5463K127 or similar should work.
__________________
Lars Pedersen
Davis, CA
RV-7 Flying as of June 24, 2012
960+ hours as of June 30, 2020. Where did the time go?
|
07-04-2011, 06:49 PM
|
 |
|
|
Join Date: Jan 2005
Location: SC
Posts: 12,887
|
|
Check out this page on Aircraft Spruce's web site.
Also, can you convert to one of these fittings (in aluminum)? I'm using one and have had no problems with it.
__________________
Bill R.
RV-9 (Yes, it's a dragon tail)
O-360 w/ dual P-mags
Build the plane you want, not the plane others want you to build!
SC86 - Easley, SC
www.repucci.com/bill/baf.html
|
07-10-2011, 12:15 PM
|
|
|
|
Join Date: Dec 2010
Location: Doncaster England
Posts: 57
|
|
I have a spare you can have ....
Hello Troy
I have this part you need, i don't need it so you are welcome...
Just e-mail me your address and i will mail it out to you.
(It will take a few days to get to you though...as I live in UK )
Best regards
Mark
mbrowning@mazdaeur.com |
07-11-2011, 02:11 AM
|
 |
|
|
Join Date: Sep 2006
Location: Trento, northern Italy
Posts: 621
|
|
I'll give you
I have the part, if you like I can bring to you @ airventure (for free)
let me know
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 04:39 PM.
|
