VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-10
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-05-2008, 06:39 PM
ivanjr ivanjr is offline
 
Join Date: Dec 2007
Location: New Carlisle, Indiana
Posts: 18
Default QB Wing Flap Gap Fairing Rivet Question

I am about ready to rivet flap gap fairings to wing rear spar. My question is, on the QB, the W1004 Wing Skin is already riveted in place. Any suggestions on how to rivet the 1/8" rivets of gap fairing under the W1004 Skin. There are about 8 rivets that seem nearly impossible to get at. Is there an alternative method or acceptable substitute rivet for this?

Thanks, Ivan

Empennage complete, QB Fuse and Wings
Reply With Quote
  #2  
Old 01-29-2011, 07:57 PM
rushmckelvey's Avatar
rushmckelvey rushmckelvey is offline
 
Join Date: Jul 2008
Location: DADEVILLE, AL
Posts: 20
Default

CS3-4 pulled rivet
__________________
Rush McKelvey
Dadeville, AL
QB RV- 8 130 hrs
IO-375 AeroSport Power
MT PROP
Reply With Quote
  #3  
Old 02-01-2011, 05:44 AM
mdaniell mdaniell is offline
 
Join Date: Oct 2009
Location: Albury, NSW, Australia
Posts: 18
Default

I used MSP-42 rivets from Vans
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:48 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.