|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

12-27-2010, 12:36 PM
|
 |
|
|
Join Date: Jan 2007
Location: Benton, Kansas
Posts: 259
|
|
.040" 2024 T3-Sheet....
Hey guys, anyone know if/where a guy can buy some .040 sheet without having to buy a full sheet? I'd like a piece somewhere around 1' X 10'. It would stink to have to buy a 4' X 12' sheet just for that much. I have called a few place around here, and they all sell full sheets, and don't sell any drop.
Ideas?
Gregg
__________________
Gregg J. Brightwell
Benton, KS
CFII/MEII, ATP, AGI, A&P
-4 Emp and Wings complete!
Fuselage out of the jig!
www.mykitlog.com/gbrightwell
|

12-27-2010, 01:51 PM
|
|
|
|
Join Date: Jan 2005
Location: Cincinnati, OH
Posts: 1,558
|
|
I bought some from a local FAA repair station here in Cincy. It was on a large roll. He just cut off as much as I needed.
__________________
SH
RV6/2001 built/sold 2005
RV8 Fastback/2008 built/sold 2015
RV4/bought 2016/sold/2017
RV8/2018 built/Sold(sadly)
RV4/bought 2019 Flying
Cincinnati, OH/KHAO
JAN2020
|

12-27-2010, 02:40 PM
|
 |
|
|
Join Date: Feb 2005
Location: Northwestern USA
Posts: 1,209
|
|
I see you're in southeast KS... if you don't mind taking a road trip to KC, you can get as much or as little aluminum you want at Airparts: http://www.airpartsinc.com/
mcb
__________________
Matt Burch
RV-7 (last 90%)
http://www.rv7blog.com
VAF #836
Any opinions expressed in this message are my own and not those of my employer.
|

12-27-2010, 02:55 PM
|
|
|
|
Join Date: Oct 2006
Location: Seattle, wa
Posts: 679
|
|
Vans will cut and sell to order. They might be able to roll that for shipping.
|

12-27-2010, 03:03 PM
|
 |
|
|
Join Date: Jan 2007
Location: Benton, Kansas
Posts: 259
|
|
.040
Matt, I have checked with airparts. I am going to see them next week to get extrusion angle for fuse longerons. Problem is, with the sheet, they sell it by the linear foot. I can get 10' long, but they make me get 4' wide. I talked to them again this morning to verify.
I will check with vans.
I wish I could be lucky enough that someone close by had a half sheet or so that they didn't need, and could part with for a fair price....  wishful thinking. 
__________________
Gregg J. Brightwell
Benton, KS
CFII/MEII, ATP, AGI, A&P
-4 Emp and Wings complete!
Fuselage out of the jig!
www.mykitlog.com/gbrightwell
|

12-27-2010, 03:04 PM
|
 |
|
|
Join Date: Feb 2005
Location: Northwestern USA
Posts: 1,209
|
|
Quote:
Originally Posted by Gregg Brightwell
I wish I could be lucky enough that someone close by had a half sheet or so that they didn't need, and could part with for a fair price....  wishful thinking. 
|
I'd offer to help, and I'm sure I have that much to give you, but it's all in little pieces in my scrap box.
mcb
__________________
Matt Burch
RV-7 (last 90%)
http://www.rv7blog.com
VAF #836
Any opinions expressed in this message are my own and not those of my employer.
|

12-27-2010, 05:01 PM
|
|
|
|
Join Date: Jan 2008
Location: Ashland, OR
Posts: 2,573
|
|
Aircraft Spruce
ACS will sell you various sheet sizes - I've ordered aluminum sheet from them many times.
__________________
Steve Smith
Aeronautical Engineer
RV-8 N825RV
IO-360 A1A
WW 200RV
"The Magic Carpet"
Hobbs 625
LS6-15/18W sailplane SOLD
bought my old LS6-A back!! 
VAF donation Jan 2020
|

12-28-2010, 04:51 AM
|
|
|
|
Join Date: Dec 2006
Location: Winston-Salem, NC
Posts: 317
|
|
Quote:
Originally Posted by scsmith
ACS will sell you various sheet sizes - I've ordered aluminum sheet from them many times.
|
Same here.
__________________
Bill Settle
RV-8 N38CW (Reserved)
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 12:42 AM.
|